I used Google Translate plugin with Firefox, which gives a small icon in the bottom right corner for site translating.
https://addons.mozilla.org/en-US/firefox/addon/translate-this/
http://translate.google.com/transla...iezas-Comando-MM-vintage/page3&langpair=es|en
The Spanish version:
http://www.hablemosderelojes.com/fo...lizaci%F3n-de-piezas-Comando-MM-vintage/page3
Here's a preview of the link above as translated by Google...
Hello,
Several things:
The prints .... mmmmm I'm going to touch me for a while, have been very very well. I think it would SMZ great.
I agree with Kike in the subject they are flat at the rear dome is an awkward face.
The rear of the problem would be recorded as you have pointed out the measures. Perhaps we should join those who want each unrecorded and then send them to record together. So no problem.
Well, and I to mine: The Plexis.
Linking with proposing Mogwai: http://www.hablemosderelojes.com/for...postcount=4017
On behalf of Plexis as.
Finally, from my limited experience in the past few weeks I'll see if I describe some pros and cons, some little trick and a photo.
Mogwai says he went for 45 € 160 Plexis in 3mm ... that's great. It's a great price. I plan to plexi would make it almost chubby, 5mm (of 8 is too much then you will see.
The problem with this type of Plexis is only good if you do well are flat, or tapered. If it's "vault" that appears ugly and bad character called Abbereitor .... ie it does not look right there under the plexi.
A little is good, is certainly vintage, but very quickly becomes annoying Aberreitor.
Family photo:
From left. to right and top to bottom: 8mm-convex 35.mm emptying trunk 5mm-32mm, 8mm, slightly domed 32mm, 8mm, 30.5mm stem, two pieces of plexi 5 and 8mm,
And in the bottom row: 5mm-36.4mm straight (minifiddy), bought a box Tropic19 for Marine Nationale, 8mm-35-5mm (I came out something small and have to be reused for another box) pulidÃsimo trunk.
In detail:
Comparison of thickness 5mm and 8mm unpolished and polished:
Comparison of tapers, left and right slightly curved straight
Comparison 35.5 mm on the left just singing something almost straight and right round the empty 8mm inside (inside)
More emptying compared 8mm:
And now compared to the dial so you can see Don Abbereitor (the light is rather poor, will be the effect epro)
Curved glass and emptying
Crystal tree:
The excess c ... 5517/Tudor Snowflake Rolex box:
And the plexi bought:
Don Aberreitor:
From left to right: 5mm-36.4mm straight, almost straight 8mm-35.5mm, 8mm-32mm domed, 8mm-35.5mm emptying and highly domed.
My recommendations / conclusions:
- Learn what you can do Plexis flat / conical to order and be safe
- Plexis for front and rear
- With the laser machine can be recorded, so if we save burn care after
- Investigate online the heat molding process with a sheet of 2mm, and see what happens.
- Continue working on discharge: we must try to make the interior emptied without "rough cuts" rounded as possible, reduce the aberration. And if you keep the thickness is reduced. Hence the thermoformed not have aberration.
- I will continue to discharge it when caught 2mm try thermoforming with a hairdryer and a mold or putting boiling water.
- See if just the second bloody Egi and ... I'm testing the effect spider ... to see if I crawl with crutches to where I left the dial drying ....
- I think I'll discharge it gives it a serious craftsman, besides the rectum pulidÃsimo I had something small, and I will recycle to 32mm for Seiko.
Sorry for the tochaco.
regards
EDIT: I forgot the tools used:
- Sandpaper from 180 to 1500
- Electric sander
- Dremel with various polishing heads
- Accessory dremel with polishing cloth
- Various liquids polishers:
- Sidol for metals does not work quite there
- Vitroclén: is a solution with some suspended particulitas fat, equivalent to fine sandpaper, do well to leave matt
- Froggy brand liquid mercadona vitro: very fine, almost like poliwatch
- Poliwatch: the best, hand-applied leaves it flipas polishing
- Liquid polish paintings Titanlux ... I have not tried it say it's like the poliwatch ... see
- Rasp and saw (blade of fine lepo careful not to burden us with hair) to cut into squares then octagonal and then give them a circular shape.
---------------------------------------------------------------------------------------
Oh snap! It looks like someone is making custom crystals out of chunks of Plexi!
Freakin sweet idea to do this with a "vintage" DSSD!
https://addons.mozilla.org/en-US/firefox/addon/translate-this/
http://translate.google.com/transla...iezas-Comando-MM-vintage/page3&langpair=es|en
The Spanish version:
http://www.hablemosderelojes.com/fo...lizaci%F3n-de-piezas-Comando-MM-vintage/page3
Here's a preview of the link above as translated by Google...
Hello,
Several things:
The prints .... mmmmm I'm going to touch me for a while, have been very very well. I think it would SMZ great.
I agree with Kike in the subject they are flat at the rear dome is an awkward face.
The rear of the problem would be recorded as you have pointed out the measures. Perhaps we should join those who want each unrecorded and then send them to record together. So no problem.
Well, and I to mine: The Plexis.
Linking with proposing Mogwai: http://www.hablemosderelojes.com/for...postcount=4017
On behalf of Plexis as.
Finally, from my limited experience in the past few weeks I'll see if I describe some pros and cons, some little trick and a photo.
Mogwai says he went for 45 € 160 Plexis in 3mm ... that's great. It's a great price. I plan to plexi would make it almost chubby, 5mm (of 8 is too much then you will see.
The problem with this type of Plexis is only good if you do well are flat, or tapered. If it's "vault" that appears ugly and bad character called Abbereitor .... ie it does not look right there under the plexi.
A little is good, is certainly vintage, but very quickly becomes annoying Aberreitor.
Family photo:
From left. to right and top to bottom: 8mm-convex 35.mm emptying trunk 5mm-32mm, 8mm, slightly domed 32mm, 8mm, 30.5mm stem, two pieces of plexi 5 and 8mm,
And in the bottom row: 5mm-36.4mm straight (minifiddy), bought a box Tropic19 for Marine Nationale, 8mm-35-5mm (I came out something small and have to be reused for another box) pulidÃsimo trunk.
In detail:
Comparison of thickness 5mm and 8mm unpolished and polished:
Comparison of tapers, left and right slightly curved straight
Comparison 35.5 mm on the left just singing something almost straight and right round the empty 8mm inside (inside)
More emptying compared 8mm:
And now compared to the dial so you can see Don Abbereitor (the light is rather poor, will be the effect epro)
Curved glass and emptying
Crystal tree:
The excess c ... 5517/Tudor Snowflake Rolex box:
And the plexi bought:
Don Aberreitor:
From left to right: 5mm-36.4mm straight, almost straight 8mm-35.5mm, 8mm-32mm domed, 8mm-35.5mm emptying and highly domed.
My recommendations / conclusions:
- Learn what you can do Plexis flat / conical to order and be safe
- Plexis for front and rear
- With the laser machine can be recorded, so if we save burn care after
- Investigate online the heat molding process with a sheet of 2mm, and see what happens.
- Continue working on discharge: we must try to make the interior emptied without "rough cuts" rounded as possible, reduce the aberration. And if you keep the thickness is reduced. Hence the thermoformed not have aberration.
- I will continue to discharge it when caught 2mm try thermoforming with a hairdryer and a mold or putting boiling water.
- See if just the second bloody Egi and ... I'm testing the effect spider ... to see if I crawl with crutches to where I left the dial drying ....
- I think I'll discharge it gives it a serious craftsman, besides the rectum pulidÃsimo I had something small, and I will recycle to 32mm for Seiko.
Sorry for the tochaco.
regards
EDIT: I forgot the tools used:
- Sandpaper from 180 to 1500
- Electric sander
- Dremel with various polishing heads
- Accessory dremel with polishing cloth
- Various liquids polishers:
- Sidol for metals does not work quite there
- Vitroclén: is a solution with some suspended particulitas fat, equivalent to fine sandpaper, do well to leave matt
- Froggy brand liquid mercadona vitro: very fine, almost like poliwatch
- Poliwatch: the best, hand-applied leaves it flipas polishing
- Liquid polish paintings Titanlux ... I have not tried it say it's like the poliwatch ... see
- Rasp and saw (blade of fine lepo careful not to burden us with hair) to cut into squares then octagonal and then give them a circular shape.
---------------------------------------------------------------------------------------
Oh snap! It looks like someone is making custom crystals out of chunks of Plexi!
Freakin sweet idea to do this with a "vintage" DSSD!
