How thick headed are your PAMs?

[Drulee]

I tried to get some measurement over on RG before it went down, but only one member stepped up. Let's see how capable RWI members are at using calipers

Please measure your 44mm cases (with case back and crystal installed) and post the result here, along with case type (manual/auto), material (ti/SS) and source (DSN/PWC/T4D/Cartel/Sead...).

Here is an example: 13.9mm Manual Titanium from Jackson Tse

Anyone with a genuine PAM, PLEASE post your measurements, as well.

Thanks for your help.

 

[Drulee]

Just to clarify, I want your measurement of the case, not the measurement from the dealer's site.

Thanks for your participation, if you do decide to contribute.

EDIT: I will put measurements from members who contributed to my other thread on RWG here, and keep the table updated with all measurements.

Origin / Type / Measurement / Note
-------------------------------------------------
Gen / 000 / 14.55mm / crystal rises 0.6mm above top of bezel

JacksonTse / Manual Ti / 13.9mm
JacksonTse / Manual PVD / 14.8mm
JacksonTse / Auto PVD / 17.2mm
EddieLee / 111 / 14.6mm / crystal rises 1.2mm above top of bezel
PWC / 089 / 15.8mm
DSN / Old school PVD / 13.2mm
DSN / 240 / 16.9mm / old style bezel
DSN / 240 / 17mm / case back is 3mm
DSN / 104 / 17mm / case back is 3mm
DSN / 229 / 16.8mm / case back is 3mm
DSN / 086 / 16.77mm / case back is 3mm
DSN / "Big Egi" / 19.049mm
unknown / Pre-V / 14.1mm
JimmyFzu / unknown / 14.0mm / w/DSN caseback
Andrew / 201/A / 14.39mm / w/DSN caseback
Sead / 212 / 17.7mm
Sead / 111H / 14mm
PWC/T4D / 250 / 16.4mm / old style case with pusher at 10
PWC/T4D / 127 / 18.1mm / still has protective plastic on back and crystal

THICKEST case, so far: Novesh's DSN "Big Egi" @ 19.049mm
thinnest case, so far: DSN "old school" PVD @ 13.2mm

 

[Drulee]

Nobody from this forum (RWI) has anything to contribute? All the above measurements are from RWG members. I suppose there may be some cross-membership (get your mind out of the gutter ), but come on.

 

[Cloudhopper]

I'd love to help you, but i don't have calipers

 

[Drulee]

I'd love to help you, but i don't have calipers

At least you have an excuse

 

[Drulee]

Alright, now that I've gotten over my 240 mishap, let's get some more measurements coming in - especially for genuine PAMs. Does this board just have a very small PAM rep community?

Don't make me beg - I'm sure it wouldn't be a pretty sight...