• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Help on deciding which PAM 111

T

topsop

Getting To Know The Place
26/9/13
20
0
0
WalkerDH said:
Asian clone, but in both case the micrometric screw is too short.
Click to expand...

Hello. What is the replica on pam111 in your opinion is the most similar to the original. What is the replica of the screw of the correct size and length?
According share the link , please.
With best wishes. Andrey
 
ALE7575

ALE7575

Section Mod
Section Moderator
Certified
18/1/11
19,846
423
83
topsop said:
Hello. What is the replica on pam111 in your opinion is the most similar to the original. What is the replica of the screw of the correct size and length?
According share the link , please.
With best wishes. Andrey
Click to expand...

Hi Andrey

You are trying to take the shorter way from your first post
Forgetting that the nicest part of this hobby is learning, searching, selecting and then getting the reps

Nowadays all good reps of PAM 111 have the same short screw. But there are other more important flaws as in every replica. Read for more info:
PAM Luminor 44mm CASE-SETS - Noob vs. KW vs. H maker - ALE-Klockis Review
http://forum.replica-watch.info/vb/showthread.php?t=150417
The Last Steps to the Gen(Part I)–Swan Neck & Incabloc Mods.–Jan 2013
http://forum.replica-watch.info/vb/showthread.php?t=134438
The Last Steps to the Gen(Part II)-Crown-Pin gasket-Gears-Wheels&Engravings
http://forum.replica-watch.info/vb/showthread.php?t=134437

Anyway you will get the answer in a lot of posts in this forum

To get info about PAM reps read:
"Reference PAM REVIEW-GUIDE" - Replica Search, Identification, Evaluation & Selection
http://forum.replica-watch.info/vb/showthread.php/reference-pam-review-107365?t=107365

Anyway, WELCOME to RWI from Spain

ALE
 
T

topsop

Getting To Know The Place
26/9/13
20
0
0
Greetings from Moscow! And thanks for the reply!
I will examine topics that you gave me.
I used to have a replica pam005 and I wore it. Now I want a sandwich, so I'm here :)
Anyway - thank you very much for the warm welcome. Now I am with you!!
Best regards, Andrew
 
Z

z3roshiftt

Getting To Know The Place
13/7/14
63
0
6
Listened to ALE! Just got the PAM 111 N Factory V3 with Y-incabloc..........ASIAN!
 
T

topsop

Getting To Know The Place
26/9/13
20
0
0
Thanks for the recommendation, sir. I wrote the distinguished Marlin. I hope for his answer. I want to order a watch with his mod. have a nice day
 
J

judy

Getting To Know The Place
9/6/14
18
0
0
Just got the 111 latest Noob V3 from Toro! Bought both the asso and rubber straps from Toro, and already looking at aftermarket strapmakers online. :nana: SO EXCITED. Even paid an extra $10 for express shipping from China. Didn't bother with Swiss ETA or the incabloc, but I'll look more closely at the watch when I get it. If I'm not happy, I'll probably learn into making these mods myself.

Question, I asked for QC pictures when placing the order. Should I have asked for those first? Because... I just sent them the money, and realized that if they don't send QC pics, I'm already out ~$300. I just wanted to look for glaringly obvious flaws, especially to see what the swan neck looked like since that seems to vary wildly according to ALE.
 
I

ikugan

Renowned Member
25/5/10
582
16
18
Judy tds will typically ask for payment first. After receiving payment is when you will receive qc pics. Toro is awesome. You have nothing to be worried about.
 
You must log in or register to reply here.
Top Bottom