Fit eta movement to 40 mm sub case

[Raymond]

Trying to build a 40 mm rep sub with a ETA movement, the movement came in around 25 mm and the inside of my case is 29 mm so I can’t find info on how to size this thing .i spoke with the lady at star supply and asked her about sizes and she told me it would work and there are no refunds . Since it is my first build and new in this I failed to measure the inside of my case . Any help or suggestions would be appreciated.
Thanks

 

[Raymond]

I found the movement ring raffles sent, with my parts .i bought the eta from star so it was a crazy day here in Florida with the hurricane looking like it is heading my way

 

[R2L]

Is your case from ST gen spec (i.e. for a 3135 movement)? If so, what ETA movement do you have? If it is a 2824, it will work. But if it is a 2836 it will not.

 

[Raymond]

Is your case from ST gen spec (i.e. for a 3135 movement)? If so, what ETA movement do you have? If it is a 2824, it will work. But if it is a 2836 it will not.

2824 I got it assembled today finally. Thanks for the reply