Datewheel question

[snbr2011]

Hi folks,

Before I discovered the forum I had purchased a few pieces that I had relumed and I kinda like them and want to keep them as well, but I hate the datewheel, since all the updated versions out there, I noticed that watches from puretime have the right datewheel, could I get the new datewheel and install it? or would I have to buy a new movement? if so could you guys point me to the right direction as to where to get the datewheel or the movement with the upgrated datewheel?

Here's a picture of the pam329

and here is a pic of my pam270 relumed by stroda sitting next to a pam270 gen dial

Thanks guys
Felix

 

[snbr2011]

Anybody?

 

[hurk]

Im no where close to being as knowledgeable as some of the other guys on here but it might help to know what kind of a movement u have.

Probably be able to contact a Td or one of the modders on here to source one easily from there on.

 

[mysterio]

Like hurk mentioned, it would be hard to determine if the datewheel in Angus' site will fit your watch without knowing what exact movement your watches have. But looking at the PAM329 in your picture, you would be well better served by buying a new watch instead. The dial is far from being accurate so putting a better datewheel will not be doing much (since you are more focused on the dial than on the small date window).

If you consider my suggestion, I would offer another one and ask you to wait a bit more. With the cosmetic improvements in the P9000 rep movement being released in the new PAM312, the PAM329 is ripe for an update (technically it uses a P9001 but I guess the text can be remedied), datewheel most likely included.

 

[snbr2011]

Thank you very much

Im no where close to being as knowledgeable as some of the other guys on here but it might help to know what kind of a movement u have.

Probably be able to contact a Td or one of the modders on here to source one easily from there on.

 

[snbr2011]

Great news about the clone movement! I will wait then, no big deal. Do we know when to expect this new 312 with the clone movement?

Thanks mate

Like hurk mentioned, it would be hard to determine if the datewheel in Angus' site will fit your watch without knowing what exact movement your watches have. But looking at the PAM329 in your picture, you would be well better served by buying a new watch instead. The dial is far from being accurate so putting a better datewheel will not be doing much (since you are more focused on the dial than on the small date window).

If you consider my suggestion, I would offer another one and ask you to wait a bit more. With the cosmetic improvements in the P9000 rep movement being released in the new PAM312, the PAM329 is ripe for an update (technically it uses a P9001 but I guess the text can be remedied), datewheel most likely included.

 

[mysterio]

Great news about the clone movement! I will wait then, no big deal. Do we know when to expect this new 312 with the clone movement?

Thanks mate

The new PAM312 is already upon us.

KW PAM312 O Series Discussion

 

[RWatch]

Try with DSN or a watchsmith here...

 

[snbr2011]

Thanks Guys

 

[jonnyknox]

You got a 23J Seagull movement... I don't think that the datewindow position is similar to 7750... :-(