caseback opener for submersible 44mm

[WatchFlave]

Hey folks,

im searching a caseback opener for a submersible 44m in the style of the following one.

I already got one like this but he does not fit on the submersible. One the luminor however he works fine.

And I know there are a ton other methods which may work fine, but im searching for something like that.

Any help is appreciated!

 

[mysterio]

There are lots of those on ebay. Good luck!

 

[WatchFlave]

There are lots of those on ebay. Good luck!

Also for the submersible? The one I have does not work on the submersible as the caseback is to high


Gesendet von iPhone mit Tapatalk

 

[viper420]

Don't know if this is what you are looking for

http://www.ebay.com/itm/Professiona...740345?hash=item3ac277e479:g:-40AAOSwpDdU2iDF

 

[chris3007]

You can find these tools also at aliexpress, for around $10


Sent from my iPhone 6

 

[PaMister]

I bought my 44m opener from AliExpress. It works fine with 087Hfac but is too small for Noob243 V2. I don't know how much case back size differs in different models (gen or reps) or is it just inaccuracy of reps. Haven't dried with SLOB or 390.

 

[WatchFlave]

Yeah the problem ist the caseback of the 243 - this one seems bigger an doesn't work with my 44mm opener


Gesendet von iPhone mit Tapatalk

 

[jonnyknox]

44mm luminor opener is to small for 44mm 1950-case.

And the 45mm opener is to big for the 1950-case.

I haven't found a 44mm 1950er case opener, yet....

 

[d4m.test]

Also for the submersible? The one I have does not work on the submersible as the caseback is to high


Gesendet von iPhone mit Tapatalk

by "submersible" do you mean the PAM243? You need a special size for the PAM 243 and PAM187 among others. Contrary to popular belief, Panerai has many different sizes of caseback diameter. More than the 4 from most Chinese sets for sale.

Measure your diameter and order one of these from Esslinger.

http://www.esslinger.com/horofix-panerai-watch-case-individual-dies-or-set-of-9/

 

[WatchFlave]

Thanks for the info. I will check the diameter when I'm at home and then see if I find a correct opener.


Gesendet von iPhone mit Tapatalk

 

[WatchFlave]

[MENTION=63540]Grimlocktime[/MENTION] you where right, the caseback has a different size. As I found out, the inner diameter should be 40,8mm. The only opener I found was in a set on ebay:

http://www.ebay.de/itm/311603455274?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

the correct one is called pan 12-040

 

[d4m.test]

That's a great deal for all the sizes you'll ever need.