resizing a tag heuer link - can't get the push pin out (rw)

[jsn]

**(retard warning)**

try as I might, I just can't seem to get the push pin out of my Tag link chrono. I'm following the resizing procedure but the damn push pin won't budge. Any tips or tricks to help me figure this out?

cheers,
Jason

 

[Panerino]

The only thing I can think of would be you are pushing it in the wrong direction. I would assume you have tried both directions so it just might be stuck. I had a couple I thought I would never get out but they eventually came out after some extreme force was applied and some extreme swearing :x :x :x

 

[geopatr69]

Hi Jason,
Check this out. http://www.rwg.cc/members/index.php?s=449b4bb07e36e7569f22d8a1bcfeef69&act=Attach&type=post&id=1993

 

[jsn]

Hi Jason,
Check this out. http://www.rwg.cc/members/index.php?s=449b4bb07e36e7569f22d8a1bcfeef69&act=Attach&type=post&id=1993

george,
that was the guide i was looking at but just couldn't get thepin out. I'm at work now but I'll try again when i get home. Thanks.

 

[geopatr69]

Hi Jason,
Check this out. http://www.rwg.cc/members/index.php?s=449b4bb07e36e7569f22d8a1bcfeef69&act=Attach&type=post&id=1993

george,
that was the guide i was looking at but just couldn't get thepin out. I'm at work now but I'll try again when i get home. Thanks.

I PM'd you my work number. I am 3 hrs behind you. you can call me when you get home. I'll still be working. :wink:

 

[amedman]

Make sure you push the pin in the right direction. Push pin in from the side of the watch that the date and pusheres are on.

I pushed mine further in from the wrong side and it was a bitch to push back out.