1st purchase after merely 2days

[stonesix]

I pulled the trigger for the best rep Pam 111N to date just merely 2 days after visiting this contagious RWI.

Now waiting for for TD confirmation.opcorn:

Can't wait to lay my hand on it.

So the next move is to look up for good affordable strap...

Haha....so excited.:biglaugh:

 

[hzardous]

Welcome to this addictive hobby!

 

[fborja]

I´ve been lurking the forums for 2-3 days myself too, came here looking for a Mont Blanc replica but after reading quite a lot I´ve decided to go with a PAM111N for myself too as a first replica! waiting for dealers to confirm stock to order it now!!

If you dont mind.. from whom did you order your 111N? and how much was it?

 

[stonesix]

I made my purchase from puretime.
To me, I think it has the easy to browse website. Just my preference.

I got myself this one
http://puretime.co/product/pam111-n...n-brown-croco-leather-strap-with-pre-v-hands/

How about you?

Sent from my GT-N7000 using Tapatalk 2

 

[ALE7575]

I made my purchase from puretime.
To me, I think it has the easy too browse website. Just my preference.

How about you?

Sent from my GT-N7000 using Tapatalk 2

Yes Puretime is a very good dealer (one of the best)
But there are many other good dealers in the RWI TD List.
http://forum.replica-watch.info/vb/forumdisplay.php/trusted-replica-dealers-168
They all have their pros&cons, it depend on the chraracteristics of the buyer.
It is a question be answered by the own buyer

ALE

 

[fborja]

I made my purchase from puretime.
To me, I think it has the easy to browse website. Just my preference.

I got myself this one
http://puretime.co/product/pam111-n-v3-noob-best-edition-on-brown-croco-leather-strap-with-pre-v-hands/

How about you?

Sent from my GT-N7000 using Tapatalk 2

I was looking at the websites too, but found out theres better deals with the ones that dont have one, I got it from Sead from supermirrors for $238 + 15USD shipping, super deal... only downside is I couldnt pick between rubber or leather straps, but with the money I saved i got myself a nice custom made italian leather strap from 2Dstraps (not a trusted dealer here tho) FOR 32 EUR!!

I´m also thinking of buying the Rubber strap with deployant buckle from silix´s site... for $50usd shipped.

GL finding a good looking strap!!

 

[ALE7575]

Not always the best price is the best choice !! be careful with straps
Bear it in mind

ALE

 

[ALE7575]

I pulled the trigger for the best rep Pam 111N to date just merely 2 days after visiting this contagious RWI.

Now waiting for for TD confirmation.opcorn:

Can't wait to lay my hand on it.

So the next move is to look up for good affordable strap...

Haha....so excited.:biglaugh:

Just another infected man
PAM disease is so contagious....
No cure, moreeover.

Only relief : reading PAM GUIDE in the evening

ALE

 

[TastyTreats]

Congrats Mate ! Good Choice - I recall when I bought my first rep many a year ago.

I think it was a Rolex Sub Noob.

Ahh they were the days.

One could state it was the start of something very special ..... and expensive.

 

[stonesix]

Ahhhhh.......!! Waiting is torturing, a day after I received the QC pic. China is off for moon cake festival and China National Day for the whole week, that's means the total waiting will be long long week...:banghead::banghead::banghead:

Sent from my GT-N7000 using Tapatalk 2

 

[stonesix]

How many of you buy from puretime?
I rejected the first QC pic because of visible chip off at 6.

First QC item: chip at 6.

Unfortunately, the 2nd QC item also not good.
With visible dent at lug and worn lug screw.
I am not nickpicking, but if those defect are visible from the with picture resolution, it will be worst if the watch is on hand.

so far do you guys receive good quality rep for this 111N?

2nd QC item below: Dented lug and worn/bad lug screw. :realmad:

If this is the best the QC capable of doing, why bother to QC in the first place?icard2:

Not happy customer....

 

[ALE7575]

How many of you buy from puretime?
I rejected the first QC pic because of visible chip off at 6.
First QC item: chip at 6.
Unfortunately, the 2nd QC item also not good.
With visible dent at lug and worn lug screw.
I am not nickpicking, but if those defect are visible from the with picture resolution, it will be worst if the watch is on hand.
so far do you guys receive good quality rep for this 111N?
2nd QC item below: Dented lug and worn/bad lug screw. :realmad:
If this is the best the QC capable of doing, why bother to QC in the first place?
Not happy customer....

Many people has bought from Puretime and these people are receiving good quality replicas from this dealer.
This dealer is the RWI Dealer of the Year 2011 chosen by the votes of many members. Don't forget it
You have received a first pics of a correct watch because the flaws at 6 is not visible at real size.
In the second ones is more a dirty problem than dents... maybe the screws...
Now Puretime is on Holiday until next week and sure you will receive good pics next time.
You are not misleaded and it is very soon to be an unhappy customer my friend.
You received QC pics, you rejected them, and then you have received other pics and you can reject them again and ask for others.
What's the problem in a replica market??
You are buying a 250$ replica watch not a 6000$ gen !!
Please patience. And if you finally have not a good reply from Puretime just say it in this forum

Good luck
ALE

 

[stonesix]

Hi ALE,

If anything it is my sharing with good intention which in the same time learning from others who has more knowldge than I am in this Rep hobby.
Maybe I did't phrases my sentences that could correctly convey my message. Pls forgive me as English is not my first language.

I am fully aware of Puretime as the voted TD and also China long weekend as I am from Asia too. I am patiently waiting but I can't stop my bad feeling from the poor quality in the QC pic.
It is not that long holiday bother me. However, what bother me is why the Quality Check department can't spend a little bit more effort by making sure the watch properly clean up before taking QC pics so to save both mine and their time. A request too much?
If it will be rejected then might as well making sure it the good enough QC pics. in the first place.

I can't inteligently guessing whether its dents or dirt from the pic, and it will be too late when I finally realised it after it arrived and it will be my trouble to deal with all the unneccesary hassle of returning and emailing.

Does buying $250 rep and joining this forum make me an cheapskate arsehole? And I deserved to live with that possibly dent? What I am paying for is a so called super Rep from a voted TD, it must live up to its name, I won't even pay it if its a lousy rep that cost only $0.25.
Bad swan neck and so... doesn't deter me from buying a this Super Rep, but cosmetically its should be 99.5% good.

Please don't get me wrong and I hope to make friend here as I come when I try to explain myself.
I just love watches and hopefully buy a Super rep...becasue I can't justify the Gen for its value at this moment. I have Gen Seamaster myself, and like to try out Pam for its uniqueness before taking the plunge to Gen one day.

Peace!!
Thanks for your good luck wishes and thanks RWI for finding me a good Rep. :cheers:

 

[watchman12345]

The first watch is fair enough to reject if there is a piece out of the lume at the 6 marker. I don't really see what was wrong with the 2nd though.

 

[stonesix]

 

[stonesix]

Please help...I am not sure what is it in the red circled.
And I have not seen any other QC pic available in the forum from other buyer having the same dent/dirt.

Waiting for their reply after their holiday, if the answer is removable dirt or it just reflection, I will definitely accept this one without question.
But please don't short changed me be it $2, $250 or $2500.

I don't mind some waiting in return for a Super Rep. and I am prepared to write them a good review for the responsive QC department.
sadly not the QC pic though.

 

[stonesix]

Sent from my GT-N7000 using Tapatalk 2

 

[watchman12345]

I suspect a quick clean would do the trick there.

 

[Hamptons28]

Hi ALE,

If anything it is my sharing with good intention which in the same time learning from others who has more knowldge than I am in this Rep hobby.
Maybe I did't phrases my sentences that could correctly convey my message. Pls forgive me as English is not my first language.

I am fully aware of Puretime as the voted TD and also China long weekend as I am from Asia too. I am patiently waiting but I can't stop my bad feeling from the poor quality in the QC pic.
It is not that long holiday bother me. However, what bother me is why the Quality Check department can't spend a little bit more effort by making sure the watch properly clean up before taking QC pics so to save both mine and their time. A request too much?
If it will be rejected then might as well making sure it the good enough QC pics. in the first place.

I can't inteligently guessing whether its dents or dirt from the pic, and it will be too late when I finally realised it after it arrived and it will be my trouble to deal with all the unneccesary hassle of returning and emailing.

Does buying $250 rep and joining this forum make me an cheapskate arsehole? And I deserved to live with that possibly dent? What I am paying for is a so called super Rep from a voted TD, it must live up to its name, I won't even pay it if its a lousy rep that cost only $0.25.
Bad swan neck and so... doesn't deter me from buying a this Super Rep, but cosmetically its should be 99.5% good.

Please don't get me wrong and I hope to make friend here as I come when I try to explain myself.
I just love watches and hopefully buy a Super rep...becasue I can't justify the Gen for its value at this moment. I have Gen Seamaster myself, and like to try out Pam for its uniqueness before taking the plunge to Gen one day.

Peace!!
Thanks for your good luck wishes and thanks RWI for finding me a good Rep. :cheers:

I completely agree with your statement. I'd rather pay 500 for a super rep rather than a $50 rep with a dent, or scratched up face.

 

[stonesix]

I suspect a quick clean would do the trick there.

I hope it would. But only the dealers can confirm.