Brand Spankin' New - Pam 048 - Need Info

[jr87492]

Nice looking watch in from Josh at PC.
Sorry for dumb question - how do I set time and use crown etc. ??
Didn't expect owner's manual, but woulda been nice to have something. Counting on this excellent group for Help.
Thanks in advance and yes, i'm trying to learn.

 

[jiro]

you see how the lever on CG is opened on picture below?

that's the first step.

then you pop out the crown once to set the date and pull it all the way out to set the time.

when you're done, push it back in. and get the CG lever on it closed position.

hope it helps~ :wink:

 

[Highflyingclive]

The crown has three positions. Fully in, halfway out and fully extended.

At position 1 - fully in, the movement can be wound.
At position 2 - halfway out, the date can be set.
At position 3 - fully extended. the hands can be set.

"Position 2" can sometimes be hard to find - especially if you are unused to the system

I have found it easier to pull the crown out as far as it will go. I then push it back in, very gently, until I feel a slight click. This should be "Position 2". It may take some practice before you can find "Position 2" with confidence. But you have all the time in world Practise makes perfect.

 

[jr87492]

Thanks much for input....

Now about that CW/CCW thing........?

 

[crick]

clockwise counter clock wise???

one thing someone's told me is to not change the date between 10 and 2. possible to break the datewheen on the asian7750 that way. either change date before 10 or after 2

 

[Matt Watch]

Nice watch - I was the same way with my first PAM.

Good Luck. Enjoy!