Lebron Pusher Fix

[TheDonSL]

Hey Guys,

Anyone know how to fix this? I was putting a new croc on my Lebron and the diamond rectangle plate on the pusher was all of a sudden popped out. It screws around clockwise and counter clockwise, but does nothing to stay in. I tried pushing hard on the chrono to see if it would stick back in, but nothing.

Thanks for any help anyone can provide.

-=TheDonSL

Sent from my iPhone using Tapatalk

 

[Garuda]

My guess is the black surround piece has detached from the diamond push and stuck inside guard. if guard can be removed like GP watches reglue black piece. Pusher is held with a screw so avoid spinning or could drop off

 

[TheDonSL]

My guess is the black surround piece has detached from the diamond push and stuck inside guard. if guard can be removed like GP watches reglue black piece. Pusher is held with a screw so avoid spinning or could drop off

So glue it back in?


Sent from my iPhone using Tapatalk

 

[Retina]

there was someone with the same issue awhile back on his lbj, some advised to glue it back in, he eventually gave up and sold it on m2m... dont believe its a hard fix though, you might have to take apart the crown guard to ensure it fits properly

 

[Garuda]

There doesn't look to be much room to make strong glue contact so take out movement and remove the push components. you will have better idea on the construction once everything is out.

 

[TheDonSL]

I want to avoid removing movement. Is there no easy fix?


Sent from my iPhone using Tapatalk

 

[TheDonSL]

I fixed it guys, thanks for the help. After looking more closely, the black pusher goes around the rectangle diamond piece and was sliding in and out. I put a thin strip of glue on the diamond piece and slid the pusher back out and pulled with a needle nose pliers to ensure it came out all the way. Hopefully it won't give me anymore issues.


Sent from my iPhone using Tapatalk