QC questions on Royal Oak Offshore Diver Forged Carbon

[Dr Dre]

Hi there

Just done ordering an AP and after getting the QC I would like to understand if I should/can reject them or not.

1) Stress marke on the bezel at the 26min, just next to the screw





2) blemish on the casing




Thanks for any help!

 

[mark3]

Hi there

Just done ordering an AP and after getting the QC I would like to understand if I should/can reject them or not.

1) Stress marke on the bezel at the 26min, just next to the screw





2) blemish on the casing




Thanks for any help!

Looks normal. You can ask PT to clean the watch



Verstuurd vanaf mijn SM-G901F met Tapatalk

 

[Dr Dre]

Thanks a mil.


Sent from my iPhone using Tapatalk

 

[takoxavy]

the marks are just handsweat from my experience....

 

[shirlz156]

what factory/version is this fc diver?

 

[takoxavy]

what factory/version is this fc diver?

j12 v5

 

[wooky492]

Ask for another photo. I'm sure they are either finger grease or just unique fc pattern. ;-)

 

[Mandreas]

Ask for another photo. I'm sure they are either finger grease or just unique fc pattern. ;-)

This. The way FC catches light can really be tricky when it comes to spotting defects/imperfections in the casting. You may be right, but as others have said there's a much greater likelihood it's just fingerprint smudges or the natural mottling of the FC.

 

[Dr Dre]

the marks are just handsweat from my experience....

I sent them a message pointing out the two things. Lets see what they come back with. I will keep you posted.

Thanks for all the input!

 

[schumi]

I'll give you some friendly advise

Don't wear this watch on hot days

FC will get soft and chip


Sent from my iPhone using Tapatalk

 

[peterpl]

Looks like the numerals of the 50 and 30 are touching. Common issue on the j12 v5

 

[Dr Dre]

Looks like the numerals of the 50 and 30 are touching. Common issue on the j12 v5

What exactly do you mean by 'touching'?

RE hot wealther - i am lucky 'winter is coming'

UPDATE: PT is getting a new one from the maker.