-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
My TC Sub V6 (a lot of pics)
- Thread starter sicilianu
- Start date
- 18/8/14
- 1,089
- 69
- 48
- 18/8/14
- 1,089
- 69
- 48
Nice piece Lagunax but I have always thought that TC's watches gen construction makes them already waterproof..Tony Chen?!? LOL!
here is a shot of my TC!
I will update my review with macro pics and a new shots in a few days...( I am waiting for the macro lenses for iPhone).
Can someone tell me if there is any difference between TC crystal and gen crystal? Besides the LEC ofcourse!
A cheap set of small screwdrivers off ebay will do fine Imo, and loctite is a good idea just guarantees you don't have to worry about them coming loose, all I do is firstly get the desired adjustment (add or remove links) with all screws (only the ones I've messed with) screwed down loose so I can easily remember which ones I have unscrewed, then I proceed to get a wooden toothpick dab it in the loctite and apply it to only the female thread at the tip of the link, seems to do the job fine! Cost of screwdriver set £1 and loctite was given me free,
Thank you ooar. About the loctite, I was wondering if it already comes with some, making the screws hard to unscrew. A few times I've had to use a blow dryer to loosen / melt the loctite so the screw would come off. Is this the case on TCs? Want to be prepared.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hi, I´ve never seen or read about a TC coming with Loctite on the screws. The bracelet is high quality, all screws should work well. If one does not come off easily on the first try go for the next one and leave it alone.
Like on every other, You could/should give the TC bracelet a 24 hour baby-oil-bath (or WD40 or Teflon dry-lube, think it´s called Tuff-glide) depending on what You prefer/have at home and than wash it with warm water, an old toothbrush and maybe a bit of toothpaste. Never needed any Loctite on it, this depends if You regularly use it or not. Have fun around - seems like Your waiting for the best watch around soon to come
Hi, I´ve never seen or read about a TC coming with Loctite on the screws. The bracelet is high quality, all screws should work well. If one does not come off easily on the first try go for the next one and leave it alone.
Like on every other, You could/should give the TC bracelet a 24 hour baby-oil-bath (or WD40 or Teflon dry-lube, think it´s called Tuff-glide) depending on what You prefer/have at home and than wash it with warm water, an old toothbrush and maybe a bit of toothpaste. Never needed any Loctite on it, this depends if You regularly use it or not. Have fun around - seems like Your waiting for the best watch around soon to come/images/smilies/smile.png)
Thanks!
- 18/8/14
- 1,089
- 69
- 48
After I've received the TC V6 I have adjusted several times its bracelet, removed links and screws. I does not have anything on the screws a I didn't have one problem regarding them as I just screwed them down with a normal screwdriver and it been 3 weeks without falling down (screws). Don't worry just wear it.After I've received the TC V6 I have adjuste several times its bracelet, removed links and screws. I does not have anything on the screws a I didn't have one problem regarding them as I just screwed them down with a normal screwdriver and it been 3 weeks without falling down (screws). Don't worry just wear it.
- 18/8/14
- 1,089
- 69
- 48
