• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

biggest mistake i made on the 15400

I

iori_del

Active Member
15/4/12
244
0
16
Hi Guys, i need some guide.

I had took out my 15400 bracelet to clean it. However the nitemare started. I cant screw them back. Especially the end screw. I tot it is the same the ROO but they are 4 tiny screws.

Any advise or guide pls if not i can only leave it to rot.

Thanks in advance
 
M

MADRED7

I'm Pretty Popular
5/5/11
1,055
3
38
... best way will be ...

have the bracelet mounted in the same direction it was before. Try all screws in their different positions, they Need to screw in easily ... if not, try another screw on that hole.

Be careful and gentle, use a correct sized screwdriver.

Wish you luck and a steady Hand.

Dr. Theo
 
D

d4m.test

Guest
+1 on the correct screwdriver and be sure You are fitting it the correct way round (the bracelet). It´s easier if You have it open (release one link) in 2 parts
 
C

ciceroyeah

Renowned Member
8/8/13
573
10
18
is this a serious thread? It's four screws. You put the bracelet lugs in place, put the screws in, and uh... screw.
 
D

d4m.test

Guest
I'll be waiting for the sale thread. ;)

Not familiar with this watch, but just make sure you never force anything if it doesn't feel right. If you cross thread anything, it's over. Listen to the great advice about having a proper screwdriver, not a cheap dollar store set. Also make sure the threads are catching properly by gently pushing the screw in while turning it counter clockwise first. When you feel the thread catching properly, you can start turning clockwise carefully.
 
I

iori_del

Active Member
15/4/12
244
0
16
Ya man. I can't believe. Due to the engineering level of the screw. U need to get the correct onto the hole. With the endlink. It is crazy. After trying for 72 hrs. I manage to put back tat crazy
 
D

d4m.test

Guest
You managed, congrats, that´s the main thing would have been frustrating to give up after 71 hours. Leave it like that now and it will be fine:)
 
J

jwwong82

Do not accept unsolicited offers
21/7/14
5
1
0
Is the case screw the same as the bracelet screw links?
Just noticed one of my case screws for the bracelet has dropped off...
 
J

jwwong82

Do not accept unsolicited offers
21/7/14
5
1
0
Thanks for the reply.
Looks like I will need to get some from Ryan..
 
You must log in or register to reply here.
Top Bottom