• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Home wi-fi signal boosting suggestions

Mendota

Respected Member
16/10/08
3,220
88
0
MN
Hey tech guys, I am having home network signal issues and I am wondering if anyone can help me.

I use Century Link for my ISP and I have an Actiontec PK5000 DSL modem with built in wireless router functions. I am using this for my wireless network.

Currently my signal strength is mediocre. I have my router placed in my home office, on the main floor. I have dead zones on the upper floor and also down in my basement.

In my fitness room in my basement I have a flat screen and a Blu Ray player, which has wired ethernet capability but is not wireless. I purchased a Vonnet dongle which connects to the USB port on the blu ray player and to the ethernet port on the back. It converts the device from wired to wireless. I cannot pick up a reliable signal where it is located, though. It works maybe 2 out of 10 times and even when it does, it drops the connection after about 20 minutes. According to my wireless analytics app on my phone, the signal is horribly weak and intermittent in that location.

In an attempt to boost the signal strength I purchased an Asus high gain antenna for my router. It is supposed to boost the signal from the marginal 2dbi gain of the stock antenna to 9dbi gain. It has helped a small amount with signal strength, according to my wireless app, but it hasn't provided anywhere near the boost that I thought it would.

I also purchased a wireless network repeater that also acts as a bridge. I thought maybe I would plug my blu ray player into this in bridge mode and see if I can detect the signal any better this way since the antenna for this device is external versus the tiny little thing inside the dongle? If that doesn't work, my next plan was to set it up in another location in the house and use it as a repeater and then have my Vonnet dongle connect to the repeater.

I just spent $25 for the antenna and $50 for the repeater. Am I actually better off buying a different router instead and just using my Actiontec as a modem?

I'm just wondering if I am trying to make chicken salad out of chicken sh*t and if the Actiontec is poor as a wireless router. Maybe there are much better wireless routers that will give me the signal strenth I need without having to resort to all of these extra items.

Any advice is greatly appreciated.
 

DenisSpa

Banned member, the goat does not approve
Banned
14/6/12
2,205
0
0
Buy a new router in the $100-$200 range. They cost more for a reason.

Wish ya the best.
 

Cynikal.Mindset

Renowned Member
7/1/11
997
1
18
put the modem/router combo in bridged mode and use a separate wireless router, its the only way to be civilized my friend!
 

FrenchBully

Active Member
22/6/13
233
0
0
USA
Yea, I would say new router with dual band because you might be getting some interference. Also wifi range extender might help.
 

Hazz37

Banned member, the goat does not approve
Banned
15/4/12
918
0
0
these are superb, I live in a 1888 home 18inch thick walls, have a few dotted about and all OK easy setup
PM if you need help, I am an IT consultant.
 

Mendota

Respected Member
16/10/08
3,220
88
0
MN
Thanks for the help. I may give that router a try if my first plan of attack fails me. My current router has an internal and external antenna, and I have tried pointing it in various directions and positions, without much luck.

I am using an Android app that measures the signal strength to map out my dead/weak spots and that dead spot in my basement literally doesn't change even with the new antenna.

The Asus antenna I purchased is helping to marginally improve my signal both on the main level and the upstairs, but the basement has only improved a hair in the main living space. But I guess it might be enough to be able to position my range extender there. I have a wet bar and I might put it there to cover the basement.

The range extender I purchased is the EnGenius ERB300H which can serve as either a wireless bridge for entertainment devices or as a range extender.

http://www.newegg.com/Product/Product.aspx?Item=N82E16833168112

It has OK reviews and I am testing it out tonight first as a wireless bridge for my blu ray player and then I'll try it as the range extender.

I went to a chain store we have here called Micro Center this morning and this is what they suggested I try first. It wasn't until I got home that I realized I should ask the fellas here.

I'll report back with any success and if not, then I think I'll look into that Asus. Then I can return the stuff I bought today and be done with it.
 

Zack Morris

I'm Pretty Popular
27/5/10
1,372
9
38
Oregon

frigpig

Ghost of Sales Mod Past
Advisor
16/8/09
7,845
81
48
Ummmm, have you tried changing your output channel? If something around is running on a similer channel you'll get very slow speeds and signal strength.

Log into your modems IP, log in and try a different channel. ;)
 

Mendota

Respected Member
16/10/08
3,220
88
0
MN
Question - why would changing the channel make a difference if I don't have any other networks within range? There aren't any other wireless networks near me. Isn't that only if you have lots of interference from other wi-fi since they are all configuring themselves to the same channel?

I am currently on channel 1. The screen in my router says that is the ideal channel and the next one is 6. Should I change to 6 and see what happens?
 

wat44

Mythical Poster
20/6/09
6,950
23
0
I dont know why - it worked for me - my ISP tech guy told me to, and it just worked
 

frigpig

Ghost of Sales Mod Past
Advisor
16/8/09
7,845
81
48
Many many things can interfere with the signal.

Won't hurt to try all of them. Run a speed test on each and go with the fastest. ;)
 

Mendota

Respected Member
16/10/08
3,220
88
0
MN
^ No sh*t... it worked. I rebooted my router and then went into the setup screens. It indicated that the best channel was 1, which I had already been on, and then the 2nd best was channel 11. I switched to 11 and then walked around with my phone to check the signals. I was getting slightly higher strength all around.

The real test was I went down and turned on my blu ray player to test the signal in that weak spot. Sure as sh*t, the dongle connected immediately to Netflix and it was faster than it had ever worked before.

Now that I know it works on 11, I am going to cycle through the rest of the available channels to see if any others are even better.

Good stuff. Now I can take back that bridge/extender which ended up being DEFECTIVE anyway!!! I fracking hate it when I buy an electronic device and it is defective right out of the box. :spank:

Thanks for all of the tips and I am definitely going to use the advice in here if things become unstable again or if this is just a temporary bandaid. We'll see how it works over time.
 

frigpig

Ghost of Sales Mod Past
Advisor
16/8/09
7,845
81
48
Frigpig....for the win! :lol:

for-the-win.jpg
 

Aldo69

I'm Pretty Popular
29/10/12
1,791
34
0
Recieved a BT Home Hub 4 today. First dual channel from BT, and have to say its a massive improvement.
We live in a 1900 period sandstone property, real thick walls, and the difference in signal is fantastic.
We are running 2 ipads, 3 iphones, apple tv, X-Box 360, PS3, wifes netbook, and now my Canon printer, which I could not link up because of the old BT protocol issues.
Really is much stronger. The router lives in the hall, and my ipad would run out of wifi juice, just beyond the back doors, now am almost at the bottom of our 100ft garden before its gone.
Result.
If your with BT, and in the UK, I highly recommend the Hub-4. £35 to upgrade, or £109 to buy from BT shop.
2.5ghz and 5ghz running together, makes a massive difference. Even a wireless door chime is running on 2.5ghz and killing a good bit of your signal. Good looking hub too, and WPS button for easier pairing.


? Al FRU?
 

Mendota

Respected Member
16/10/08
3,220
88
0
MN
So here's a link to a template for a parabolic reflector that you print out and then glue onto aluminum foil. It's a lot less ghetto than using soda cans and Pringles cans. :)

http://www.freeantennas.com/projects/template2/index.html

It has been tested and the performance results are listed. With the standard size you add 9dbi of boost to the antenna, and if you double the size of the template you add 12dbi of gain.

I am going to try this with my stock antenna and then again with the high gain 9dbi antenna I purchased. If this works with my stock antenna then I can take back the store bought one.
 

dutchwatch

Active Member
1/7/12
289
0
16
What has been said before, look at channels surrounding you and choose one not in use or if all in use the one less used.

We always go with Engenius ECB300 or 350 depending on your needs. Get the signal all around the house (obviously depending on the size of the house etc). You can set the signal strenght, so if with less signal you get good results leave it there. No need to put full strenght if not needed.

I went from no signal on third story to full signal.