• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Simple fix for loose PAM dress plate

Sirlordcomic

Renowned Member
DO NOT TRADE WITH ME
4/8/14
666
0
0
Started with a clink and ended up sounding like a baby rattle soon after taking delivery....

To get at the dress plate sub-screws which affix it to the movement, you have to remove the top layer.


  1. Loosen the four screws which bind the 2 dress plates together.
  2. Split the plates apart.
  3. Tighten the loose sub-plate screws.
Be advised in my last pic, one the sub-screws had come completely out thus I could lift the entire dress assembly. You may not be able to do so.



 

SixFeetSix

You're Saying I Can Sell?
14/12/16
31
0
0
Thx, can give it a try. But which screws on this topplate do I need to loosen to get to the dressplate?
7e9676abfb25a8fda22d4ddd2eaf6a4c.jpg



Sent from the RWI mobile app
 

Sirlordcomic

Renowned Member
DO NOT TRADE WITH ME
4/8/14
666
0
0
Hmmmm, good point. Maybe start with the outermost, some may be just for show.

Sent from my EVA-L19 using Tapatalk