- 18/5/20
- 15
- 9
- 0
Hello everyone, nice to meet u! I have been in the forum for a few days and read a lot of interesting posts and articles. Today I want to bring you something I know about how to produce the top replica watches models by the manufactures.
There is a market only when there is demand, it’s economic rule. That’s why most manufactures usually choose popular watches models for producing. The heat of replica watches is basically the same as that of genuine ones. Normally, the niche brands and styles are not made by manufactures, and they cannot afford enough benefits to recover the costs in this market.
Majority of watch lovers are men, and is the same with the gender ratio of forum members. It may not be a good idea/business to spend too much resources to develop a female watch, so that the women’s replica watches that have been made for so many years are still only popular models like Cartier Balloons Blue.
Except from market demand, peer competition is also an importation factor in deciding which watch models to develop. It is different from Noob alone more than ten years ago, and now there are more than ten manufacturers capable of producing top replica watches. There are so many models and styles, even it is difficult to find popular styles that have not been produced by other factories. As for watch industry, the update cycle is quite slow, and genuine products are not released new series every year. Sometimes each manufacturer will produce the same model to compete with each other. For instance, Noob Factory produced Audemars Piguet in the early days, but later JF’s AP came into being, and raised the level of replica AP a lot, Noob gradually no longer produced it.
However, some well-known manufacturers are not happy with such competition. When some small factories produce the same products as themselves and do better and cheaper, they rely on their stronger financial funds and government relations to force them not to sell normally. It is undeniable that there are also some well-known factories who will cooperate with them and paste their own manufacturer’s name on the watches, which help to earn part of profits.
I think you must be curious about which manufacturers have done this. Please understanding that I can’t say it, because I don’t want to get trouble for myself.
After confirming the model and style, we will move to next step – production.
The top version is produced by disassembling the genuine ones and developing the molds. We have to know that some genuine watches are still expensive, even the second-hand Nautilus, the current price is close to $60,000. So due to cost consideration, there is usually only one genuine for reference to replica products with different colours and the same style/model, which also caused some trouble for the subsequent production process, most of products can be only based on the pictures to produce. For the manufacturers, it is difficult to achieve complete consistency through the pictures which cannot show the precise details and the difference of colour, for example, the colour of PF’s Nautilus with blue dial is quite different from the original version, and the PPF version was not revised until one year later.
After dismantling the purchased genuine products, the replica watch manufacturers will hand over the movement, case, strap, dial, and other parts to the foundries.
It is surprisingly that the manufacturers of most parts of replica watches are formal and legal, and even some are listed companies. These enterprises do not rely solely on the production of replica watch parts. They also have their own regular watch business, and the quality level is outstanding. Out of legal reasons, all the components produced and delivered by these manufactures have no brand and logo, there are no counterfeiting issues.
As the core of the watch - movement, most of them are purchased from China’s Seagull, Hangzhou, Mingzhu, Japan’s Miyota, and also a few rare models to use Swiss ETA. The manufactures can get these movements to modify the appearance and reassembly. In addition, there are some movements like VSF’s Omega 8500. Noob’s Daytona 4130, which require exclusive customization. As far as I know, standard movement companies will provide the customized and released movements for replica manufactures, but it needs the minimum order quantity requirement, such as 10,000 units per model, which is a big expense for factories. But this is not a big challenge for a super manufacturer like Noob, which current Daytona’s monthly sales has upto 3,000.
Afterwards, the replica manufacturer put the Logo on the parts of the regular manufacturers, and then assembled them together, then a replica watch was completed.
If you require any further information, please reply on this post instead of sending massages.
There is a market only when there is demand, it’s economic rule. That’s why most manufactures usually choose popular watches models for producing. The heat of replica watches is basically the same as that of genuine ones. Normally, the niche brands and styles are not made by manufactures, and they cannot afford enough benefits to recover the costs in this market.
Majority of watch lovers are men, and is the same with the gender ratio of forum members. It may not be a good idea/business to spend too much resources to develop a female watch, so that the women’s replica watches that have been made for so many years are still only popular models like Cartier Balloons Blue.
Except from market demand, peer competition is also an importation factor in deciding which watch models to develop. It is different from Noob alone more than ten years ago, and now there are more than ten manufacturers capable of producing top replica watches. There are so many models and styles, even it is difficult to find popular styles that have not been produced by other factories. As for watch industry, the update cycle is quite slow, and genuine products are not released new series every year. Sometimes each manufacturer will produce the same model to compete with each other. For instance, Noob Factory produced Audemars Piguet in the early days, but later JF’s AP came into being, and raised the level of replica AP a lot, Noob gradually no longer produced it.
However, some well-known manufacturers are not happy with such competition. When some small factories produce the same products as themselves and do better and cheaper, they rely on their stronger financial funds and government relations to force them not to sell normally. It is undeniable that there are also some well-known factories who will cooperate with them and paste their own manufacturer’s name on the watches, which help to earn part of profits.
I think you must be curious about which manufacturers have done this. Please understanding that I can’t say it, because I don’t want to get trouble for myself.
After confirming the model and style, we will move to next step – production.
The top version is produced by disassembling the genuine ones and developing the molds. We have to know that some genuine watches are still expensive, even the second-hand Nautilus, the current price is close to $60,000. So due to cost consideration, there is usually only one genuine for reference to replica products with different colours and the same style/model, which also caused some trouble for the subsequent production process, most of products can be only based on the pictures to produce. For the manufacturers, it is difficult to achieve complete consistency through the pictures which cannot show the precise details and the difference of colour, for example, the colour of PF’s Nautilus with blue dial is quite different from the original version, and the PPF version was not revised until one year later.
After dismantling the purchased genuine products, the replica watch manufacturers will hand over the movement, case, strap, dial, and other parts to the foundries.
It is surprisingly that the manufacturers of most parts of replica watches are formal and legal, and even some are listed companies. These enterprises do not rely solely on the production of replica watch parts. They also have their own regular watch business, and the quality level is outstanding. Out of legal reasons, all the components produced and delivered by these manufactures have no brand and logo, there are no counterfeiting issues.
As the core of the watch - movement, most of them are purchased from China’s Seagull, Hangzhou, Mingzhu, Japan’s Miyota, and also a few rare models to use Swiss ETA. The manufactures can get these movements to modify the appearance and reassembly. In addition, there are some movements like VSF’s Omega 8500. Noob’s Daytona 4130, which require exclusive customization. As far as I know, standard movement companies will provide the customized and released movements for replica manufactures, but it needs the minimum order quantity requirement, such as 10,000 units per model, which is a big expense for factories. But this is not a big challenge for a super manufacturer like Noob, which current Daytona’s monthly sales has upto 3,000.
Afterwards, the replica manufacturer put the Logo on the parts of the regular manufacturers, and then assembled them together, then a replica watch was completed.
If you require any further information, please reply on this post instead of sending massages.
