Looking for a reliable and trusted modder/watchmaker in EU. Preferably in Scandinavia.
He needs to be able to do the following mods/repairs on my Tudor Blue Pelagos V6F/XF V2:
1. Relume to gen spec, both dial and bezel.
2. Bezel fix: I wish the notch of the „60“ digit to be filed as deep as possible to receive a more "gen-like" click for this position and to get the bezel aligned and tightened. I wish not only to mod the click spring. I also wish the 3 other spring-loaded items to be improved as well. I have read it can be done by lengthen the springs carefully a bit or put an additional small screw under the springs to increase the load. The goal is to have a tight bezel feeling without any play and a louder and stronger click at „60“ like on the gen.
3. Watch stem got loose and needs to be fixed.
Thank you!
He needs to be able to do the following mods/repairs on my Tudor Blue Pelagos V6F/XF V2:
1. Relume to gen spec, both dial and bezel.
2. Bezel fix: I wish the notch of the „60“ digit to be filed as deep as possible to receive a more "gen-like" click for this position and to get the bezel aligned and tightened. I wish not only to mod the click spring. I also wish the 3 other spring-loaded items to be improved as well. I have read it can be done by lengthen the springs carefully a bit or put an additional small screw under the springs to increase the load. The goal is to have a tight bezel feeling without any play and a louder and stronger click at „60“ like on the gen.
3. Watch stem got loose and needs to be fixed.
Thank you!