• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Newbie with Hublot

jaybyname

Looking Around
21/4/24
3
0
1
Hi all.

Avid collector in the making!

Just revamping my Hublot Big Bang with a new bezel as I scratched the original one. Stipped the entire watch so i can clean and all screws came out great. Then I got to the bezel screws (6) and each one is really stiff. To the point where I bent the tip of the H screwdriver. Does anyone know if these bezel screws are fake or could they be just really tight? Its a AAA clone



 

eBoy

⏱️ RWI New Members Area Chief Janitor 🎪🛠️
Section Moderator
Certified
2/4/21
12,181
19,675
113
Eurasia
eboy-ralph.gif


Hello and WELCOME from the official RWI reception desk!

You are receiving this introduction because you either posted in the "new members say hi" section or —for the first time(s)— elsewhere. In the latter case, consider introducing yourself in the aforementioned section.

If you haven't already, please make sure to read all relevant sticky threads. They contain important and essential information such as the forum rules! Most importantly the sales rules, because you will NOT yet be eligible / allowed to sell unless you meet certain criteria / are certified first.

A good starting point is this list of resources on RWI:

Please also take another look at this important sticky that you should already have seen after logging on for the first time:

This quick anti-fraud guide is essential if you are about to order from a dealer for the first time:

If you need any further assistance, feel free to contact me or @Feefo!

We will gladly help, but please allow some time for PM responses as we have lifes outside of RWI!
 
  • Like
Reactions: Feefo

trustytime

Trusted Dealer
Trusted Dealer
3/4/16
1,707
1,349
113
Hi all.

Avid collector in the making!

Just revamping my Hublot Big Bang with a new bezel as I scratched the original one. Stipped the entire watch so i can clean and all screws came out great. Then I got to the bezel screws (6) and each one is really stiff. To the point where I bent the tip of the H screwdriver. Does anyone know if these bezel screws are fake or could they be just really tight? Its a AAA clone



If it is a high end model Hublot, the bezel screws should be genuine.

But you probably need a good swiss grade screwdriver and some patience and skills to remove the screws.

Cheers