NEED HELP! fixing my sub 1680 ETA 2836-2 movement keyless wo

[johnstonmurray]

Does anyone know how to fix the keyless works on this movement? It`s in a Rolex Sub 1680. I think when I put the stem back in I didn`t put it in correctly and now the stem won`t stay in and I`m not able to wind or set the time. It`s like the keyless won`t hold the stem in anymore. I hope I didn`t break it.
Does anyone have any pics on how to do this repair?
Should I get a new ETA 2836-2 or repair the one I have?
Thanks!

 

[marianetty]

you will have to take to pieces the keyless works and then assemble it again.
If you send me your email y can send you some photo of the process..
If you decide not to do it I can buy you the movement..

 

[gasdoc]

Here is some info and pictures, there is a similar thread going with info on this currently.

http://forum.replica-watch.info/phpBB3/vi ... 84&t=15359

Good luck.

 

[hpy540]

I need to do this on a 2836 and the link is not working because of the new board software. Does any one have the correct link?

Here is some info and pictures, there is a similar thread going with info on this currently.

http://forum.replica-watch.info/phpBB3/vi ... 84&t=15359

Good luck.