Tudor 7016 gasket size

[APjumbo]

I need a caseback gasket for a tudor 7016 ebay viet case.
I ordered a rolex 29-325-10 assuming it would fit
They are slightly too thick and slightly too big diameter.

When I use a big digital caliper on the caseback it looks like gap is about 0.6mm wide and 32.4 mm inside diameter.

I was hoping someone could confirm that I am on the right track with ordering a 32.5 x 0,6mm
For some reason I cant seem to search much info on vintage rolex/tudor gasket sizes.
In fact I cant even seem to figure out what the mm dimensions are of the 29-325 (I'm assuming 32.5mm x 1mm but that would mean 32.5mm diameter is confirmed too big for my 7016)

 

[est4129]

I am having the same problem, I ordered a set of orings from WSO that are supposed to fit a 5513 case but they are too big.

 

[Fullofdays]

I've got big rolex gasket kit incoming from ofrei. Ill let you know what I learn when I rebuild my phong 7016.

Sent from my SM-N960U using Tapatalk

 

[APjumbo]

That would be appreciated
I was thinking of ordering an assortment kit but shipping is slow these days.
On the other hand by the time I figure it out it would have arrived. So I might do the same.

 

[Fullofdays]

Go ahead and order the assortment. The chamfer is slightly different on each 7016 viet case. Mine took a 29-322 and yours is likely different. I had to play around with 3 sizes before I landed on the right one. My yodog 9411 had such a small diameter gaskwt in it I could have put 4 in with room to spare. A 9411 calls for a 29-325 but that was to big for the caseback slot.

http://www.ofrei.com/page_153.html

Sent from my SM-N960U using Tapatalk

 

[APjumbo]

Go ahead and order the assortment. The chamfer is slightly different on each 7016 viet case. Mine took a 29-322 and yours is likely different. I had to play around with 3 sizes before I landed on the right one. My yodog 9411 had such a small diameter gaskwt in it I could have put 4 in with room to spare. A 9411 calls for a 29-325 but that was to big for the caseback slot.

http://www.ofrei.com/page_153.html

Sent from my SM-N960U using Tapatalk

I’ll order the kit
thanks for the link
You have been super helpful

 

[est4129]

Go ahead and order the assortment. The chamfer is slightly different on each 7016 viet case. Mine took a 29-322 and yours is likely different. I had to play around with 3 sizes before I landed on the right one. My yodog 9411 had such a small diameter gaskwt in it I could have put 4 in with room to spare. A 9411 calls for a 29-325 but that was to big for the caseback slot.

http://www.ofrei.com/page_153.html

Sent from my SM-N960U using Tapatalk

Thanks for your help, I ordered the kit too. I have two viet tudor cases and neither came with any kind of gasket.