• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Welcome to the Brig Prisoner6

C Master

General RWI Dogsbody
Staff member
Global Moderator
Administrator
Certified
7/10/15
66,291
86,735
113
Ireland
Prisoner6 this has gone on long enough and you still have not compensated mrnoahj for the misrepresentation you made in the sale. https://forum.replica-watch.info/forum/replica-watch-sales/7151961-franken-16610-sale-or-trade

He sold it on to Maron at a considerable loss.

Here is a list of what was not mentioned in the sale.

db5bdc37b58c48125ae2d7fa2aff8667.jpg
7b0675b7ecac63e9475115226a200024.jpg
7183b1d0d21343f1dd83e47cbb4e20ec.jpg
d970d0800f3524ccd6fb6c3440bed036.jpg


Look at the bent seconds hand.

ec277c01e12cd72147414ed9fbf9bee6.jpg

Big scratch at six, but according to occb2 there are tons of less apparent scratches all over.

The hands were listed at $200 and dial at $300.

Damage and notes from occb2 who has done work on this.

1) Dial - undisclosed damage. Dial is terrible and missing a foot. I think it was done on purpose because they placed a dial dot on it to align the date wheel perfectly.
2) Hands - same as above. Hands were bent and destroyed. Really bad. min and hour pinions bent and replaced.
3) Crown - same as above. Crown has bad mark.
4) Tube - not Rolex and undisclosed damage
5) Springbars - not Rolex
6) Mid case - crown tube hole epoxied, undisclosed
7) Bracelet - fake removeable link (solid), undisclosed stretch? Subjective
8) hand pinion and seconds pinion both bent. )Seconds pinion bent and I replaced it.
9. crystal gasket very very cheap. They used a cheap gasket for the crystal. Very bad. No way to seal it. I replaced it with a real one.



You owe mrnoahj a partial refund which you did indeed agree to. Since then you have stoppled talking to us. You even agreed to sell watches to compensate and you were given plenty of time to do that before you were put on No Sale. Make this right.
 

occb2

Super Moderator
Staff member
Global Moderator
Certified
10/6/14
14,018
4,052
113
This has been by far the worst watch I have worked on for a customer.

While it had some nice parts like the band sides, the dial looked like it was washed with a brillow pad. The hand pinion were bent. The seconds pinion was shot I replaced it. The tube was epoxy in and being held by a few threads. Crystal gasket held zero vacuum. If he would had gone in water it would had flood. Crown had a dent. Really. How could you sell this watch with out disclosing all this to Noah? You know better than that brother.