Quick question has anyone removed a p.4000 from a case? The little stem button on the plate seems decorative. Do I need to remove the plate to access the real button? Any thoughts appreciated.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
P.4000 Removal
- Thread starter kidcreole
- Start date
s.orologiaio
Active Member
- 19/7/17
- 424
- 141
- 43
s.orologiaio
Active Member
- 19/7/17
- 424
- 141
- 43
The setting lever has a screw, not to be pushed but unscrewed and then stem removed
Inviato dal mio iPhone utilizzando Tapatalk
Inviato dal mio iPhone utilizzando Tapatalk
s.orologiaio
Active Member
- 19/7/17
- 424
- 141
- 43
Thx for the replies guys. I turned the little screw 360 degrees with the stem in wind position and the stem came out easily. Job done and all back together!
Yup. Unitas based movements have screws. This is why I always recommend people who want to start working on watches to start with. Much easier to work on than an eta
Sent from my iPhone using Tapatalk