• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Upcoming VSF Two Tone Gold Submariner 116613LN

StreetFighter

Insert Coin
4/9/20
2,880
3,430
113
Maybe will wait it out for the 126613

116613LN and 126613LB.. that's the combo to have. The 12LB has nice white print on the dial same as the 11LN..

I wore a 11LB for 2years straight then one day I hated it. The blue bezel does not suit the watch imo. The blue bezel suited the early 116613LB with the flat blue dial, that's the dial it was designed for, but when they discontinued the flat blue dial and replaced it with sunburst in 2013 they should have updated the bezel too and made it darker. The 16613LB before it has a nice rich blue colour bezel (there were a few shades over the years) but the 116613LB got it wrong.
 

Yogibear

I'm Pretty Popular
21/8/19
1,409
614
113
Don’t want to piss on anyone’s parade but where is my calculation wrong?

Gold weighs about 19.3 grams per cubic centimeter. That means if you had a small gold dice cube of size 1 cm x 1 cm x 1 cm, (i.e., with a volume of 1 cubic centimeter), it would weigh 19.3 grams. So 1 grams would theoretically fill a volume of 1/19.3 cubic centimeters or 0.050 cubic centimeters.

Volume is area x height, (i.e., area x thickness). So theoretically 1 grams can plate an area x thickness totaling 0.050 cubic centimeters. If the thickness is 20 microns, i.e., 0.0020 cm, then the area you can plate with that much gold is 0.050/0.002 = 25 square centimeters.

3g of gold would plate a 20 micron 75 sq cm... I would guess that a two tones need a lot less.

Because it's a lie and not real gold. It would be a disaster if it actually was real gold plated.
 

HG 2000

Supporter
22/7/20
145
128
43
Will wait for pics of the actual watch, but if VSF puts the same effort into this as the others, I’m sure it will be good.

I’m still going to hold out for a No Date though.
 

Asmodeus

I'm Pretty Popular
17/4/15
1,052
266
83
Don’t want to piss on anyone’s parade but where is my calculation wrong?
Gold weighs about 19.3 grams per cubic centimeter. That means if you had a small gold dice cube of size 1 cm x 1 cm x 1 cm, (i.e., with a volume of 1 cubic centimeter), it would weigh 19.3 grams. So 1 grams would theoretically fill a volume of 1/19.3 cubic centimeters or 0.050 cubic centimeters.
Volume is area x height, (i.e., area x thickness). So theoretically 1 grams can plate an area x thickness totaling 0.050 cubic centimeters. If the thickness is 20 microns, i.e., 0.0020 cm, then the area you can plate with that much gold is 0.050/0.002 = 25 square centimeters.
3g of gold would plate a 20 micron 75 sq cm... I would guess that a two tones need a lot less.
(0.8cm width * 2.5 circumference) *16 mid links + 3.2 clasp + accounting for extra size of sel + bezel + crown = about 41cm2
 

MolluskMan

Known Member
16/10/20
184
225
43
New York, NY
There is no way they used "real" gold for the wrapping.

Hope to be proven wrong tho!

VSF is definitely on a roll!


What do folks mean by this? Are factories known to use some kind of gold alloy or even no gold at all for wrapped and plated models?
 

up2wind

Active Member
Supporter
Certified
9/6/19
335
80
28
All the concentration will be on the color tone of the 'gold'. GLHF!!
 
  • Like
Reactions: Yogibear

Yogibear

I'm Pretty Popular
21/8/19
1,409
614
113
All the concentration will be on the color tone of the 'gold'. GLHF!!

That's the biggest concern with these reps... the ARF 116613 looks 10k to 14k in colour. The VRF wrapped version has the orange tint issue.
 

DrHack

Active Member
10/8/20
345
240
43
SoCal
Would someone care to explain the difference between "wrapped" and "plated"? I know what plating is but I'm not familiar with wrapping.
 

rcom440

Put Some Respect On My Name
10/11/12
5,822
3,518
113
USA
Would someone care to explain the difference between "wrapped" and "plated"? I know what plating is but I'm not familiar with wrapping.

It’s just a thicker layer so scratches won’t show any steel underneath.