• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

VSF 126610 Submariner with VS3235 Latest Movement 72 Hours Power Reserve

ASATGMURES

You're Saying I Can Sell?
23/3/20
44
19
8
Romania
Hi guys, I need your opinion,
I've heard about hybrid movement between VSF and Clean on Reddit but never on RWI.
Do you think they are right?
I have a VSF waiting for QC and I don't know what to do with it.
https://www.reddit.com/r/RepTime/com...tm_name=iossmf

vs is the only real 3235 clone, vr is based on 3135 clone i think; anyway, can t put vs balance + bridge into vr, don t fit
 
Last edited:
  • Like
Reactions: Pene75

YellowFin

Not pretty, hardly popular
28/1/20
2,527
2,798
113
Molvania
This real vsf ? do you see movement ?

Here we go again...


jtfOgY.gif
 
Last edited:

Liam F

Known Member
17/5/20
103
41
28
O.k I want to franken mine with a genuine balance and bridge. Can anybody give me a list of parts that are required ?

Complete balance bridge with shock absorber

Do I need fork cannon pinion ?

Regards

Liam
 
  • Like
Reactions: 911cz

Pene75

You're Saying I Can Sell?
11/10/21
73
24
8
Hi there!

I approved this watch, I wanted to RL it but Lana told me that it was the last one and that there was no other stock ...
Can you tell me where I can find a decent DW that fits with the VS3235 movement please?
I think I will change the DW as soon as I receive it.

Or maybe I’m too perfectionist…

Thanks in advance
 

KJ2020

Time Traveler
Supporter
12/3/18
32,400
56,939
113
The lift angle for 3235 is 55 degrees so if the timegrapher is setup for 59 degrees lift angle, the timegrapher will think that the ticks registered are further away than what they are in reality. This will render higher amplitude since. So that is why I am asking, if anybody knows what impact this difference would make in amplitude result.

A dfference in the lift angle on the TG from the proper setting results in incorrect amp readings

Too high lift angle on TG = false high amp reading

So on a 55 lift angle movement like VS3235, if TG lift angle is

52 - amp reads 10 - 15° low
59 - amp reads 10 - 15° high

Readings from TDs are really just to see the watch is working, you don't know how well they are wound up.
 
Last edited:

Wacht

Renowned Member
6/7/20
652
266
63
A dfference in the lift angle on the TG from the proper setting results in incorrect amp readings

Too high lift angle on TG = false high amp reading

So on a 55 lift angle movement like VS3235, if TG lift angle is

52 - amp reads 10 - 15° low
59 - amp reads 10 - 15° high

Readings from TDs are really just to see the watch is working, you don't know how well they are wound up.

Alright, thanks for explaining. I had no idea how much it could differ, or if possible to make any statement out of it. But sure, it does seem like it's running great and if it reads aout 10-15 too high, that's what I was hoping for.:thanks:
 
  • Like
Reactions: KJ2020

Pene75

You're Saying I Can Sell?
11/10/21
73
24
8
What is wrong with the datewheel?

The two is not well printed, there is a hole in the middle and the bottom of the 3 is big
I have the impression that Clean uses a kind of gel unlike VSF. I'll see more closely when I receive it
 

ASATGMURES

You're Saying I Can Sell?
23/3/20
44
19
8
Romania

derjenigewelcher

Watch Enthusiast
Supporter
Certified
22/11/20
6,418
6,952
113
Switzerland
  • Like
Reactions: ASATGMURES

StreetFighter

Insert Coin
4/9/20
2,878
3,427
113
The crowns are the same. The stems will not be the same, one is for a 3135 the other is for a 3235. You should be able to unscrew the stem from the crown easy enough if you have tools, it's fiddly but you can do it.