• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

It’s here!!!! ZZF V2S 114060 VR3130!

James2020

Active Member
1/6/20
422
175
43
Just to share , jtime’s price is $40 cheaper than chazingtime and pure time...
 

GreyCactus

You're Saying I Can Sell?
28/8/19
65
40
18
This was posted on reddit earlier from a dealer regarding updates on this new version, posting it word for word.


Hi, I'm Eric. Based on the information ZZF provided me, I have made an introduction to the English version of the No date V2 Sub updated. ZZF still calls it V2, but it has been updated. So now, let's figure out what's changed!

https://preview.redd.it/5opcvnshkcd...bp&s=7e703343ff6e705c2c53be16bcb88f2b98876b5e

The updated No-date Sub will use the super clone A3130 movement, abandoning the original A2836 modified 3130 version. Its advantages are very clear:

1. The stability/reliability of the movement is based on ZZF's A3135 which boasts half a year of market testing - failure rate has proven to be very low.





2. Time adjustment is the same as genuine - turning the crown clockwise turns the hands clockwise.





3. There are only two gears (there is no date gear at all).





4. The hands, case, dial and structure are the same as the original and all parts are interchangeable with the original.



https://preview.redd.it/sxwtvzbjkcd...bp&s=c4118f318ba638d424bfacdfe33497ef20b8168a

ZZF most of the modification items are standard

1. stick polishing





2. Three-dimensional hands/ polished





3. Solid cannon pinion





4. Crystal depth





5. Standard Clean Factory insert V3





6. The same 12 o'clock lume pip as the gen,and the most luminescent Swiss SuperLuminova pigments currently available on the market, etc.



I won’t repeat them here. ZZ is probably one of the factories that accepts customer suggestions the most humbly and makes corrections in time.

https://preview.redd.it/g232gotkkcd...bp&s=4d6d44d8a8f8e0248e532e3be62ede949d395710

Dear friends, here ZZ needs to focus on explaining the problem of the indentation of the dial。

Among the dozen or so pieces of genuine black Sub I have seen, each center hole is concave inward, but the size is different. But if it is flat, it is completely wrong. Friends who are interested can find genuine pictures for comparison.

https://preview.redd.it/uh7gn3hmkcd...bp&s=cf850b08bd9a486e88939c1c62436ca1905132d4

Regarding this super clone 3130 movement, you may have some doubts. Here is a brief description of the characteristics of this movement

1. This is a modification based on the super clone 3135 movement (the genuine 3135 is also 3130 with a calendar module and a calendar gear)





2. The reliability of this movement,ZZ has used this 3135 movement for half a year, which is different from other 3135 movements on the market. The repair rate is extremely low and the reliability is quite good.





3. The structure, size, thickness, direction of time adjustment, and the feel of the two gears of the movement are exactly the same as the genuine ones.





4. This movement modification took half a year to complete. Friends who received the goods can try to adjust the gear.





5. If there is no date, the simulation degree is much higher than that with a date. With this 3130 movement, it can be said that this is one of the most perfect Sub.



https://preview.redd.it/vgo3vpiokcd...bp&s=fbc8133e4502ca890f176a881dceca455face7f1

https://preview.redd.it/f6ehf1qpkcd...bp&s=27f621a88246f48d3ac52cd7d802cf941a849851

https://preview.redd.it/gu28gw7rkcd...bp&s=49d686c2becff7070a31f376b7d9d81ca4eaf71f

The super clone 3130 movement is no longer a 2836 splint movement. With blue hairspring , the reliability is even more evident. The polishing and chamfering of the movement is even more beautiful

https://preview.redd.it/ny89jp5skcd...bp&s=d728844f614ba91d52b37c262f4e37335310916a

ZZF also spared no effort to continue to upgrade the part about the strap, some details have changed. but it is not an upgrade. We will do our best to make the most perfect Sub for our friends.

https://preview.redd.it/bzi1su1tkcd...bp&s=652f16bc8b80c2c27d29993f62339d99b3c9adc8

Questions about the price of this Super Clone 3130 movement,regarding the issue of the price of the Super Clone 3130 movement, the price of the previous 2836 modified 3130 has increased slightly. This is also a helpless move. I hope that the majority of friends can understand. Because of the production cost, we also hope that we can give you more and better products at low prices. I hope that this movement upgrade will let you understand the corresponding small increase in price. On the road of Sub improvement and upgrading, I believe that only repeated modifications regardless of cost can win your favor.



Thanks for reading

Eric
 

Spoons

Active Member
Supporter
Certified
21/4/19
425
371
63
Based on the photos from intime's listing of the ZZF 114060 with the VR3130, it looks like the case still has the 116610 engravings, which is a real shame since both the new ARF 114060 and the Noob V10 114060 have the correct 114060 engraving between the lugs. Not much of an issue if you're going to always wear this on the bracelet, but still a bit of a let down.

The bezel teeth still seem to be too sharp/thin on the ZZF as well.

Still, the VR3130 movement seems like a big step forward and ZZF seems committed to improving their subs, which hopefully pushes the whole rep game in the right direction.

ZZF:


ARF:


Noob:
 
  • Like
Reactions: phdsjain

botsyboy

Put Some Respect On My Name
Supporter
Certified
1/9/09
3,115
2,093
113
U.K.
The teeth on jtime post look much better and different to intime.
879cb41dea4488a960bb96ffad098ff3.jpg



Sent from my iPad using Tapatalk
 
  • Like
Reactions: stufuse

stufuse

Put Some Respect On My Name
22/10/17
3,662
2,449
113
UK
I have ordered it and got the QCs today.
I was trying to post some QCs but then I read that you shouldn't post a QC here unless you have a clear question about a flaw.
I'm new to this and I didn't really spot a "flaw" because to me it is almost identical to a gen and I'm content with it.
Thus I already confirmed and let Li shipped it.
Will post some pics when I get it. Thanks!

The idea of qc isn’t to spot flaws compared to gen.

It’s to check the watch is the correct model and factory and is free of any defects.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: James2020

Beone21

I'm Pretty Popular
Certified
10/12/10
1,775
271
83
Look at diamant's pics. His one starts with a Y

Verstuurd vanaf mijn GM1903 met Tapatalk
 

Kalev007

I'm Pretty Popular
25/6/19
1,734
2,797
113
Look at diamant's pics. His one starts with a Y

Verstuurd vanaf mijn GM1903 met Tapatalk

I thought he meant the dial X the rehaut X has been fixed already on no-date ETA clones as well and has a Y now.
 

Kalev007

I'm Pretty Popular
25/6/19
1,734
2,797
113
Omg loveit. Nwbig

What I don't like is the SEL recess is still a lottery on yours its quite flush and so it seems on the QC pic below as well. I had the same issue with the date and spent almost 200 EUR to get another ZZF bracelet with perfect gen like recess. I was just about to list the date for sale but pulled back now. I'll swap it to old bracelet and sell it with that as the gen like SEL recess bracelet is too valuable to give away it seems as they still may come almost flush.

I only bought the no-date because it had perfect recess OTB when I saw the QC.

Here is the date with the new bracelet:

IMG-2925.jpg


And no-date came already OTB like this:

Screenshot-2020-07-28-at-20-53-24.png
 
  • Like
Reactions: DR Russell

GMT-3

You're Saying I Can Sell?
23/7/20
30
6
0
Hey guys, I just saw these photos on IG. According to the legend, this is an update of the ZZF V2 VR3135. As you can see in the photos, here is Y instead of X. Is this the new batch of ZZF V2?

​​​​​​
 
Last edited:

GMT-3

You're Saying I Can Sell?
23/7/20
30
6
0
According to the IG, the indentation in the dial center has been corrected, the bezel now rotates less rigidly and the Y instead of X
 
Last edited:

James2020

Active Member
1/6/20
422
175
43
I thought he meant the dial X the rehaut X has been fixed already on no-date ETA clones as well and has a Y now.

Yes, i was referring to the dial X. My eyesight is really bad nowadays but I thought i saw the big right foot...
 
  • Like
Reactions: DR Russell

garnier

Renowned Member
30/5/12
609
76
28
I have doubts between this and the latest ARF. I would like to see latest arf vs this. Without considering the vr3130... wich one do you consider is closest to gen? The crown height is so noticeable?
 

Kalev007

I'm Pretty Popular
25/6/19
1,734
2,797
113
I have doubts between this and the latest ARF. I would like to see latest arf vs this. Without considering the vr3130... wich one do you consider is closest to gen? The crown height is so noticeable?

ARF is crap not gen like at all crystal sits high, rehaut engraving all wrong, sharp edge markers, bad dial, bad insert, bad case, bad SELs and so. What is even the question or doubt here. ZZF no-date is as gen as it gets with reps believe me I had them both at some point ARF and ZZF.

Look at similar photos of ARF and you can see its rep straight away the below is my ZZF no-date.

IMG-2581.jpg


IMG-1801.jpg


IMG-2472.jpg