• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

116610 LV bezel , opinions ??

JMK

Active Member
13/2/18
248
118
43
I’m certain that waiting for a gen is about as long as it will take from now till we get a more gen like insert color :)


Sent from my iPhone using Tapatalk
 

hokim

You're Saying I Can Sell?
9/5/19
61
12
0
I hope there is someone out there who has access to the gen hulk (either owns one personally or knows someone who has one), and is interested in buying the CF Insert to do a review. He would be my superhero.
 

tenx139

Renowned Member
16/5/19
801
1,543
0
US
41713a2dc3170785e3db3cbd88f155ff.jpg
f16f73064d67020c14f4416514deff8e.jpg
7b80f6e3459bf260c12e2f973901d876.jpg
2ab317b3a0ef9bf8047a6d003c724c24.jpg
d959e552e59cb2bfe074504ee0398ade.jpg
7b80f6e3459bf260c12e2f973901d876.jpg


ARF with Clean Factory LV bezel installed.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Nivka

jb3

Active Member
17/4/17
483
143
43
USA
41713a2dc3170785e3db3cbd88f155ff.jpg
f16f73064d67020c14f4416514deff8e.jpg
7b80f6e3459bf260c12e2f973901d876.jpg
2ab317b3a0ef9bf8047a6d003c724c24.jpg
d959e552e59cb2bfe074504ee0398ade.jpg
7b80f6e3459bf260c12e2f973901d876.jpg


ARF with Clean Factory LV bezel installed.


Sent from my iPhone using Tapatalk

You sure that bezel is seated all the way down? looks like the crystal is actually sitting below the insert?
 

shortlegs

Active Member
31/5/19
493
271
63
You sure that bezel is seated all the way down? looks like the crystal is actually sitting below the insert?

You are right, there looks like a sizeable gap between the insert inner edge and the crystal.
 

botsyboy

Put Some Respect On My Name
Supporter
Certified
1/9/09
3,122
2,127
113
U.K.
It’s more likely the crystal gasket is too low!


Sent from my iPad using Tapatalk
 

andyc

Nitimur in vetitum
Certified
4/6/10
1,598
543
113
You sure that bezel is seated all the way down? looks like the crystal is actually sitting below the insert?

Did you need to re-quote all the pictures again? No you didn't.
 

hokim

You're Saying I Can Sell?
9/5/19
61
12
0
It’s more likely the crystal gasket is too low!


Sent from my iPad using Tapatalk

why exactly do you think this happened? Is it because the ARF and CF bezel inserts have different dimensions? How can it be fixed?

I have a Noob hulk and am considering the CF bezel insert. Was going to give it a shot installing the CF insert myself, but I don't know if the same issue will happen like in this case where the CF insert was installed on an ARF hulk. And if it does happen, I don't know how I would fix it. Please advise.
 

tenx139

Renowned Member
16/5/19
801
1,543
0
US
hokim I don't have enough experience yet with this hobby to know why the crystal is sitting so low, the crystal is a prof Prof crystal. I installed the insert by hand, it feels and looks to be seated. I did order a press from amazon, I will see if using press helps seats it further. If it doesn't, then I will need a taller crystal gasket? I am open to suggestions on how to correct.
 

tenx139

Renowned Member
16/5/19
801
1,543
0
US
Here’s a few close up pictures of the ARF , Prof Crystal , Clean Factory ceramic insert. Questions were asked if the bezel is seated ? How high should the Crystal be above bezel height ? It’s slightly above the bezel now.
3f3706a992f27fd25231846d825925f1.jpg
2d8d50b9a8eac0aefb33023b21dde7f9.jpg
c55c8516cccbb9846b18b5c1800a45c9.jpg



Sent from my iPhone using Tapatalk
 

hokim

You're Saying I Can Sell?
9/5/19
61
12
0
hokim I don't have enough experience yet with this hobby to know why the crystal is sitting so low, the crystal is a prof Prof crystal. I installed the insert by hand, it feels and looks to be seated. I did order a press from amazon, I will see if using press helps seats it further. If it doesn't, then I will need a taller crystal gasket? I am open to suggestions on how to correct.

can you clarify: You have the CF insert installed into the stock ARF bezel right? Did you not have this issue with the ARF insert was in the ARF bezel? I'm looking at your older post where you had the CF insert laying on top of your ARF watch, and it kind of looks like the same issue existed in your ARF to begin with ... but I can't really tell for sure in the pics.
 

KJ2020

Time Traveler
Supporter
12/3/18
32,738
58,831
113
tenx139 This is a great pic. I can definitely see a color difference, and the CF color is much nicer IMO. ARF has lime/yellow tones while CF has jade/emerald tones like the gen. Some refer to it as green apple.

15660029059660.jpg


Your CF insert is sitting perfectly, and don't ever try to press a ceramic insert if that's what you had in mind (sorry if I misunderstood your intentions with the press). They crack easily.

Your Prof crystal is definitely sitting low, a taller gasket will fix that. botsyboy had it right.
 
Last edited:
  • Like
Reactions: fradic

KJ2020

Time Traveler
Supporter
12/3/18
32,738
58,831
113
VRF markers are known for being a little thicker than others, including gen. Some people like them thick, lol.

Reason for comparison is VRF is the one to beat.

15660065431751.jpg
 

Cordsen

You're Saying I Can Sell?
20/11/17
79
24
8
Denmark
As I see the new ARF v2 SH3135 with CF bezel insert and gen xtal + crystal would be a great watch!


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: KJ2020