• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

ARF 116610 with SH3135 movement

stufuse

Put Some Respect On My Name
22/10/17
3,662
2,449
113
UK
I just got a gen LN and sent my ARF 2824 for some more treatment lolol!! Nevertheless I am tired with all the variations and "new" versions that come out every now and then, they will not make a near perfect Sub but these are perfect for the rest of the people out there (99,999%)... we are doomed to perfection since this is our hobby and a gen only would satisfy me totally (and a TC of course!)

What else are you doing to the ARF? Would
Love to see side by side.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: hm242408

efthimis

Mythical Poster
20/6/15
7,122
3,037
113
What else are you doing to the ARF? Would
Love to see side by side.


Sent from my iPhone using Tapatalk

Not much, I have a gen bezel and insert but will not be using those, crystal/gen movement/TC wheel is more than enough... the only let down will be the weak lume but you cannot have it all within a budget
 

stufuse

Put Some Respect On My Name
22/10/17
3,662
2,449
113
UK
Was your TC wheel for an ETA or a 3135


Sent from my iPhone using Tapatalk
 

Jackster

Renowned Member
Supporter
Certified
8/1/17
852
214
43
Paradise! (SE Qld)
TC = Ginault. It's common knowledge.

Hi, i've just purchased a Ginault 180260gsln (Limited Edition) Prototype from a member here (hasn't arrived yet) and am curious about the TC link, is it a proven fact or hearsay? Could the movement be just an Asian cone?
And how come Ginault still sell the prototype on their website when only 35 were made? Surely these all sold ages ago? Apparently the one i am receiving is Serial # TE124.
 

The Rod

I'm Pretty Popular
15/10/17
2,058
829
113
Hi, i've just purchased a Ginault 180260gsln (Limited Edition) Prototype from a member here (hasn't arrived yet) and am curious about the TC link, is it a proven fact or hearsay? Could the movement be just an Asian cone?
And how come Ginault still sell the prototype on their website when only 35 were made? Surely these all sold ages ago? Apparently the one i am receiving is Serial # TE124.

If it were a proven fact the guy would be in jail for selling countless reps, don't you think?
 

srhcustom

You're Saying I Can Sell?
12/12/18
63
29
0
Here's what my ARF looks like now...

Getting ready to franken this thing:
Gen crystal: 25-295-c12-1
Gen crown
Gen case tube
Gen reversing wheels
And of course, gen DW

With that in mind... I'll probably have some ARF parts available soon.

7ALqe.jpg
 
Last edited:
  • Like
Reactions: mikegemmill

srhcustom

You're Saying I Can Sell?
12/12/18
63
29
0
Here's how my ARF looks after gen crystal, case tube, crown, and reversing wheels. There was no need to use the gen DW after installing the gen crystal.

rDgMI.jpg


And here's the before and after timograph results...

rDFAo.jpg
 

Masterpiece

Looking Around
19/2/15
3
0
0
Here's how my ARF looks after gen crystal, case tube, crown, and reversing wheels. There was no need to use the gen DW after installing the gen crystal.

rDgMI.jpg


And here's the before and after timograph results...

rDFAo.jpg


Very nice!
i want to buy arf 2824 what movement has yours?
where did you bought all the gen parts and how much did you paid for them?
and does all parts fit without doing mods,so plug and play?

Best regards
 

Vvvlllooo

I'm Pretty Popular
13/6/15
2,412
1,770
113
Here's how my ARF looks after gen crystal, case tube, crown, and reversing wheels. There was no need to use the gen DW after installing the gen crystal.

rDgMI.jpg


And here's the before and after timograph results...

rDFAo.jpg

Looks good, since you have the gen DW...you might as well put it on..here's a comparison pict...
 
  • Like
Reactions: freediver

srhcustom

You're Saying I Can Sell?
12/12/18
63
29
0
Very nice!
i want to buy arf 2824 what movement has yours?
where did you bought all the gen parts and how much did you paid for them?
and does all parts fit without doing mods,so plug and play?

Best regards

Mine is the SH3135 and it’s running beautifully. Over the past couple of week it’s only gained 3 seconds.
As for parts, I bought them all on eBay. Only mod was tapping for case tube.
WR tested at 100m
 
  • Like
Reactions: Masterpiece

Masterpiece

Looking Around
19/2/15
3
0
0
Mine is the SH3135 and it’s running beautifully. Over the past couple of week it’s only gained 3 seconds.
As for parts, I bought them all on eBay. Only mod was tapping for case tube.
WR tested at 100m

Thanks bro,

Yours is nearly perfect!
a realy beauty:wub:


just recieved my arf hulkv2 904L, but seller tells me that it has a2836 movement.
can I just swap a gen hands,dial and Bezzel without mods?

any other advice will be very welcome to make the watch as close as possible to a gen.

cheers✌️
 

freediver

I'm Pretty Popular
24/3/17
2,772
1,389
113
i doubt your seller about the 2836
And 28xx movements you cannot swap gen hands
gen dial you have to cut the feet
 
  • Like
Reactions: Masterpiece

Masterpiece

Looking Around
19/2/15
3
0
0
I have my thoughts as well but,what do you think it would be inside?
it looks great straight out of the box,has all stickers and correct inscription for arf v2.
so I am 99% sure it’s from AR..
maybe it do have a Rolex clone movement,or 2824..
 

freediver

I'm Pretty Popular
24/3/17
2,772
1,389
113
Do you plan to service it?
If no, can you open the case back and link a pic ?
 

Tobel

Put Some Respect On My Name
6/7/17
5,424
3,616
113
How is the rehaut alignement these days? ROLEXROLEX with minute markers, on the left side of the watch?
 
  • Like
Reactions: rapier82