• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Ceramic submariner dial guide

caicai3087

Looking Around
9/5/19
3
0
0
Ok so we start with the 116610ln dials first
8aE3pDJ.jpg
this is a very very rare dial the og bp dial replicated this
m0yapum.jpg

This dial =symbol is not centred with the word date to the right of the x in rolex
x0TOTSq.jpg

This dial has = symbol centred and the word date starting under the x in rolex
tctliCX.jpg

This dial is tottally different and is what the noob v2 v3 V4 and v5 tried to replicate it has a flat s in swiss made
B3rhUDL.jpg

This dial has the =symbol centred but the word date to the right of the x in rolex

This dial has a different font for the crown to all the dials.the word date starts under the x in rolex. And the = symbol is not centred

Og6YScd.jpg


The Last ln dial is like the noob dials but as you can see has skinny marker surrounds also has flat s in swiss made
0phuBFi.jpg

Here is aNother dial new in 2016 it is simular to the usual long ft dial but with a new font .tall 0 instead of oval .here are a couple more pics of the new ln dial without me marking it
21oshza.jpg

641fk5.jpg

atmzih.jpg
Next is the 116610lv hulk dials
CBq2xUX.jpg


This dial mk1 was not released other than the proto
swg4sZt.jpg


This dial the = symbol is centred
uOkJruC.jpg

u1UiP1M.jpg
2016 hulk new layout
And the second hulk dial the = symbol is not centred that's the lv dials

Next the smurf dials
A4kJvSC.jpg


This is very rare and the first dial produced.bp replicated this dial has flat s in swiss made
tEePymD.jpg


The next dial the = is not centred and the word date is too the right of the x in rolex
to3eoRI.jpg


This dial the only difference is the = symbol is centred
g9F0So1.jpg

This is a brand new 2016 smurf dial layout

Next up are the two tt blusey sub dials
1m95Jsa.jpg


This has thick marker surrounds and centred = symbol
With date to the right of the x in rolex
mW23tmR.jpg

New long ft blusey dial for 2016
uszfd.jpg

This dial has thin marker surrounds.
= symbol is centred with the word date starting under the x in rolex

Next up is the 114060 there are 3 variety
KW8xGeW.jpg


This has thick marker surrounds and = symbol not centred very rare

ppdGRnN.jpg


This dial has = symbol centred and thin marker surrounds

Nm1fZws.jpg


This dial has thick marker surrounds and centred = symbol

F8SvdFm.jpg

Here is a brand new 114060 dial that will only be on a 2016/17 rehaut case to be period correct.this has thick white gold marker surrounds,bold submariner font.italic staggered = symbol and the same long ft font from the new 201617 6 didget date subs.the only difference is it's a no date.and says oyster perpetual


I've noticed that some dials have a bevel on the date window cut out. It's mostly on Hulks here is a pic
GYblJqN.jpg

hSu8A6g.jpg

Introduced in great detail 。Thank you!
 

Cheeto

Horology Curious
26/6/18
17
3
0
smoke curious if you know what factory bracelet will fit a genuine ceramic sub? Would a noob bracelet or VRF bracelet work?
 

Interesting

Renowned Member
Supporter
Certified
19/8/19
965
3,810
93
There is a review by a TD on a Clean Factory ceramic bezel and the on on ZZF Sub that is very close to gen in terms of the titanium colour, depth and font.
 

k4jun

Ω Section Moderator
Section Moderator
Certified
25/4/15
2,945
1,235
113
This is copypaste of the info which gen dealer posted on their site.
https://millenarywatches.com/submariner-ceramic-dial-variations/
[h=1]Rolex Submariner Ceramic Dial Variations[/h] Many of Rolex’s models are manufactured for years and years under the same reference, with no real visible change. This is mostly true to Rolex’s modern watches, as many of Rolex’s vintage watches have received notable updates during the course of its production without changing the reference number. Take, for example, the Submariner 14060 which changed from tritium to Luminova, to Superluminova, to having an engraved rehaut, to having both two and four lines of text. That is a lot of changes to a watch that kept the same reference number…

But many of Rolex’s watches receive updates and changes so small that they are barely visible to the untrained individual. And certainly too small for Rolex to update the reference number.

As you probably know, Rolex as company is very conservative. But at the same time, they consistently strive for nothing but perfection. This means that they are always looking for ways to improve their watches, no matter how minor they may be. Most of the time, they are minor so that for most people, they are not even noticeable. And for more noticeable updates and changes, they demand a completely new reference.

In this article, we will talk about Submariner ceramic dials, and highlight how Rolex, during the production of the Submariner 116610 and 114060 has made minor changes to the dials. And for most people, these changes have gone unnoticed, so we hope this article can be eye-opening for you, regardless of how small these changes are.

While these small dial variations of the ceramic Submariners aren’t something that people consider today, who knows, in the future, they may affect which ”generation” of Submariner ceramic is more collectible. This is what makes this topic a whole lot more interesting.

While the variations are not as big as many vintage watches such as feet first or meters first, it’s the small details that collector’s look at. But what the future holds, we have to wait and see.

Because Rolex has not publicly mentioned these small variants in the dials, it makes things a lot more interesting, as we as collectors have to do our research among the production years, and try to circle in when in the production of these changes took place. With that in mind, please understand this resource is in no ways meant to be a complete guide.

The fist Rolex Submariner with maxi case and maxi dial was the Rolex Submariner 116619LB in 2008, followed by the 116618LN, 116618LB, 1166613LN 116613LB in 2009.
  • 2010 saw the release of the most classic Submariner reference 116610LN.
  • 114060: 2012
  • 116610LN: 2010
  • 116610LV: 2010
  • 116613LB : 2009
  • 116613LN: 2009
  • 116618LB: 2009
  • 116618LN : 2009
  • 116619LB: 2008
Seeing that it has passed more than a decade since most of the Submariner watches were released, these watches have had a long production period, without any official changes to them. But obviously, Rolex has changed a lot in its manufacturing process during this decade, and as a result, this has lead to small differences between them, depending on when they were made. Let’s look at some of these differences, with a focus on the dials.

Obviously, these small dial variations will have different years as the year of manufacture does not necessarily have to be the same year they were sold. This means that it is difficult to say a clear-cut time period when each of these dial variations and changes were implemented. So please note that the dial variations and the respective years of the Submariners below is not the case for all Submariners, and differences exist between.
[h=3]Rolex 116610LN Submariner ceramic dial variations/generations[/h] Let’s start with the Submariner 116610LN – the most classic and iconic Submariner:

[h=3]Rolex Submariner 116610LN 2010-The first year of manufacturing:[/h]
  • ”SUBMARINER” printing is made with rather thin letters
  • ”A” in “Submariner” is flat at the top.
  • The depth rating has a leaning ”f”.
  • The “ft” has little space from “=” and “300m”.
  • The m is close to the 300 and slightly leaning forward. The ”=” is slightly leaning forward.
  • The “m” in swiss made of the 2010 version is different from others. The”middle leg” in the “m” does not extend to the bottom.
[h=3]Rolex Submariner 116610LN from 2012[/h]
As you can see when comparing these two images, these two watches have small yet noticeable differences in dial printing.
  • First off, the top of the ”f” in ft does not extend over the t as it did on the 2010 version
  • Furthermore, the line across f does only point out on the right side, whereas on the 2010 pointed out on both sides. This is also true for the ”t”. The f is also smaller and does not extend as high or as low. You can also see that the zeros in ”1000” are more oval in this version, whereas on the 2010 version, the zeroes were circular.
  • You will also be able to notice that the ”Swiss made” printing is not identical.
  • On the first version, the ”S” in ”Swiss” is more compact, with the ends pointing straight. But on this dial, the ends point more up and down. The letters on ”OFFICIALLY CERTIFIED” are also different. For example, the ”C” and ”E” are different, with the latter version not having any edges, but rather straight lines.
  • The biggest difference is perhaps the ”=” between ft and 300.
  • As you can see, there is a big gap, as following ”100 ft = 300 m” as opposed to the previous 100ft=300m”.
  • You will also notice that the = is completely straight and not leaning forward. Lastly, there is also a gap between ”300” and ”m”.
[h=3]Rolex Submariner 116610LN from 2014[/h]
Here is a Rolex Submariner 116610LN from 2014.
  • What is most interesting about this watch is that the dial has what has started to be known as ”Submariner” fat font by some people.
  • The printing is much thicker than previous versions, and the font is also different. Compared to previous years, the ”SUBMARINER” text does not have any sharp or pointy edges. While it has kept its distance between ft and 300m, the ”f” is now raised and ends above the ”t”. It also extends longer than the zeros, similar to the first generation, however, the ft printing is not as sharp as the first Submariner ceramic dial variation.
  • The = still has a distance from ft, but the ”m” in ”300m” has been moved closer to ”300”, so there is no longer a space there.
  • Looking at the ”SWISS MADE” text, you can also see that this is more similar to the first Submariner, with the ”S” pointing straight forward rather than pointing up and down.
  • It also appears that the Superlative chronometer officially certified printing has been made smaller, and the lettering is certainly not as pointy and sharp as before.
  • “A” in Submariner is not flat at the top.
[h=3]Rolex Submariner 116610LN from 2016[/h]
  • Oval zeros in 1000.
  • Line across f in ”ft” cuts across the letter.
  • The end of t in ”ft” does not point up
  • Space between ft and 300.
  • Space between 300 and m.
  • Submariner print not bold.
  • Swiss made print similar to 2012 print with ”S” not looking almost like a reversed Z.
  • Not previously seen font of ”ft”.
[h=3]Rolex Submariner 116610LN dial variant 2018[/h] We have noted that 2018 versions have both fat and thin printing, which is interesting. But this is most certainly the case for the other dial versions and years in this article as well. See the two images below of two 2018 Submariners as reference:
  • Bold Submariner print
  • Space between ft and “=”
  • No space between 300 and M
  • Flat S in Swiss made
  • Bold printing on all other text
  • Oval zeros
  • The”middle leg” in the “m” from “ chronometer does not extend to the bottom.

As you can see, there is a distinct difference between these two.
  • Round zeros.
  • ft together.
  • f extends over the “t”.
  • No large gap between ft = 300.
  • no large space between m and 300.
  • The line does not cut through on both sides on f in ft.
  • No bold Submariner print, but not as thin as certain previous versions.
  • The ”D” in Date” starts after the X in ”Rolex”.
[h=3]Rolex Submariner 116610LN from 2019 dial variation[/h]
  • Oval zeros in ”1000”
  • Spacing between ”ft”, ”=” and ”300”
  • Spacing between ”300” and ”m”
  • The line in ”f” in ”ft” points out on both sides.
  • Submariner printing not as bold
  • Swiss made printing different from the above image
  • ft smaller
[h=3]Most notable differences between the ceramic dial variants[/h] As you can see from the examples above, there are some elements of the dials that have the biggest differences.

These include:
  • SUBMARINER printing
  • Spacing between m and 300
  • The shape of the zeros
  • ft font and style
  • Spacing between =
  • Swiss made printing
These differences also apply to the rest of the Submariner references other than the 116610LN. [h=3]Additional Rolex Submariner ceramic dial variations[/h] Another dial variation is the date window.

On some dial variations, the date window has a frame, whilst others don’t. See the reference images:

[h=3]Reasons for the Rolex Submariner ceramic dial variations[/h] Rolex has not gone official with any of these small dial variations. The changes are simply too small to demand a new reference number, and thus, Rolex continues its production. Having in mind that the Submariner ceramic has been in production for more than a decade, you can expect that things have changed in the way they make their watches. The most logical explanation of these differences has to do with the retooling of printing pads during production. However, as Rolex has made changes to the dials that are not affected by the printing pads, some of these variations are absolutely conscious changes. This includes, for example, the font of the print, the space between ft = 300m, the space between 300 and m. And more.

There are some theories that Rolex does this to combat counterfeiters, however, others argue that the more variety in the dial, the more difficult it would be to identify a fake Rolex Submariner.

What is most notable is that most official retailers are not aware of these variations, which, ultimately, can cause them to mistake a watch for being fake when that is not the case.
 

Smoke

Legendary Member
18/3/13
14,093
2,220
113
Hi guys,

what do you think about the new ARF dial (v3):

aLCpQ.jpg

aLXAR.jpg
aLd88.jpg
aLPGL.jpg
aLk7K.jpg
D in date is 0.5mm too far to the right lol so it's very very minor flaw
the d in date should start just about under the right foot of the x in rolex

There are to variants of this layout one the d starts right under the x in rolex and the other the d starts just slightly under the x in rolex.your dial is trying to replicate the dial with the d slightly under.but the arf the word date need to be left a touch
 
Last edited:

drvintage

Known Member
Supporter
Certified
21/11/19
122
75
28
Thank you smoke !! if just the one fail is this 0.01mm to right "D", I will keep the dial ... seems arf has made a very good job on this time :)
 

drvintage

Known Member
Supporter
Certified
21/11/19
122
75
28
I have checked one more time... my dial from arf v3 is exactly copy of the production year 2011... looks 100% same