• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

VSF 3135 best clone movement.

CsViking

Known Member
MULTI ACCOUNT
28/11/21
132
23
18
Hello Guys i was looking in an article about VSF 3135 and its says that the VSF its the closest clone movement and looking at those pictures i found more thing that make me think VSF is by far the best movement 3135 .I will show the images and what more i see than their writtes i see more reassons to think why VSF is the best ,
j600gY.jpg
j60FHn.jpg
j60S4s.jpg
j60G13.jpg
j60xoD.jpg
j60JPk.jpg
j60V0o.jpg
j60geJ.jpg
j6bDtP.jpg
j6bZNW.jpg
j6bzHS.jpg
j6b31Q.jpg

You can see how closer and how much more copy is to the gen that makes me think everything in this movement can be change with the gen .
Im not a watchmaker and may that things are not so important for the life time of the movement but i think they left the others clone movments years behind in every way.
 
Last edited:

traderjoe1968

You're Saying I Can Sell?
28/7/20
66
9
0
Asia
Thanks for this comparison ! Can’t wait for my VSF QC pics!


Sent from my iPhone using Tapatalk
 

KJ2020

Time Traveler
Supporter
12/3/18
32,372
56,759
113
The movement on the right in those pics is a VR3135. AFAIK, the VS3135 is no longer being made as VSF no longer exists. Surely there are fake VS3135s being made by some factories, and some that I've seen on Ali Express. But I don't believe these are the same as an original VS3135 in an original VSF rep when they were still being made.
 

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Patron
Certified
13/3/16
1,289
1,961
113
I installed a genuine balance and bridge in a VS3135 a few days ago and it runs perfectly. No VR or any other clone movements that I know of (except 4130) can accept genuine rolex balance. This indicates that the movement is the closest one to gen 3135. However, the gen balance did not work on another VS3135 I have and I can't explain why. I also installed a refurbished gen rotor and auto wind module.

oascom has said that the reversing wheels in the VS3135 are prone to failure and he suggests swapping them out to gen or VR reversing wheels (correct me if I'm wrong bro).
.


 

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Patron
Certified
13/3/16
1,289
1,961
113
The movement on the right in those pics is a VR3135. AFAIK, the VS3135 is no longer being made as VSF no longer exists. Surely there are fake VS3135s being made by some factories, and some that I've seen on Ali Express. But I don't believe these are the same as an original VS3135 in an original VSF rep when they were still being made.

KJ: I obtained some VS3135s that are un-engraved. They are definitely VS but I was advised stocks are limited so I guess they're unengraved pre-raid leftovers. If engravings are not important then these should satisfy someone wanting a VS3135.

thrillofhunt got them for me.
 
  • Like
Reactions: KJ2020

p0pperini

patr0n h0arder
Gold Patron
Certified
29/1/19
8,895
29,415
113
UK
The movement on the right in those pics is a VR3135. AFAIK, the VS3135 is no longer being made as VSF no longer exists. Surely there are fake VS3135s being made by some factories, and some that I've seen on Ali Express. But I don't believe these are the same as an original VS3135 in an original VSF rep when they were still being made.

Good points KJ. Also, I'm not entirely sure whether the increasingly widely reported problems with VS movements are happening in the 3135 or the 3235?
 

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Patron
Certified
13/3/16
1,289
1,961
113
Anyone know how it compares to the VR movement

I can't speak for reliability or longevity, but I can tell you that the amplitude is noticeably higher on the VS3135 compared to the VR3135. Generally speaking watchmakers consider higher amplitude a good sign, but at the end of the day if it keeps good time and is reliable, that's all the counts. The VS3135 amplitude is pretty much the same as a gen 3135 in dial-up position. In other positions the gen wins because its tolerances are much tighter.
 
  • Like
Reactions: KJ2020

CsViking

Known Member
MULTI ACCOUNT
28/11/21
132
23
18
Yes it’s true that about reversing wheels but non of them yet fail they just seems lower quality that it should
 

jax_teller7

You're Saying I Can Sell?
4/12/21
67
15
8
I had seen photos of a 3235 movement, does it exist? I did not understand if it is higher than the vsf3135, why is it called 3235? is it a better version? I'm a bit confused thanks
 

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Patron
Certified
13/3/16
1,289
1,961
113
I had seen photos of a 3235 movement, does it exist? I did not understand if it is higher than the vsf3135, why is it called 3235? is it a better version? I'm a bit confused thanks

Here's some info for you on the difference between the two movements: https://quillandpad.com/2019/11/19/...x-calibers-3135-and-3235-and-which-is-better/

Whether it's "better" depends on your view. In some ways it's better and in other ways it's not.

The true clone VS3235 did exist for awhile, but it's out of production and has been replaced with a hybrid VR movement that's a 3135 but has some 3235 features including the ability to accept a gen 126xxx dial which has no dial feet.
 

talkingshadow

You're Saying I Can Sell?
26/4/13
57
6
8
i got 3235 and 3135 vsfs post raid... i found that 3235 is more accurate.. 3135 is gaining 20 seconds daily.... need to have it inspected.
 

jax_teller7

You're Saying I Can Sell?
4/12/21
67
15
8
Here's some info for you on the difference between the two movements: https://quillandpad.com/2019/11/19/...x-calibers-3135-and-3235-and-which-is-better/

Whether it's "better" depends on your view. In some ways it's better and in other ways it's not.

The true clone VS3235 did exist for awhile, but it's out of production and has been replaced with a hybrid VR movement that's a 3135 but has some 3235 features including the ability to accept a gen 126xxx dial which has no dial feet.

how come they no longer do the vs3235 if it turns out to be the best?
 

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Patron
Certified
13/3/16
1,289
1,961
113
how come they no longer do the vs3235 if it turns out to be the best?

Presumably the movement manufacturer (Dandong) had to stop manufacturing 3235 because it's a new movement with a dozen active patents. The 3135 patents have long expired.
 

Chikko

You're Saying I Can Sell?
24/8/14
25
0
1
I’ll look over it. Thanks bro.
btw- the 16610 case is 40mm?
 

yuggoboy

Horology Curious
5/2/16
9
0
1
Happy New Year to all of you. Where can the VS3135 with engravings be bought?