NEW Richard Mille RM010

[Takel98]

Sure mate. My vernier is run out of battery and will change it and measure it tonight!!!

Cheers

Yes would love to see measurements on this one looks great!

 

[Swiss_goupil]

As said before, I believe this RM010 use the JBF RM001 case. So while [mention]Zeula [/mention] changes the battery of his calliper I took some measurements of mine

Sent from my iPhone using Tapatalk

 

[jm_brc_7057]

As said before, I believe this RM010 use the JBF RM001 case. So while [mention]Zeula [/mention] changes the battery of his calliper I took some measurements of mine

Thanks for the measurements. It's not bad at all. I think gen is 48mm x 39 mm x 13,84mm. So it's basically 1 mm higher, 1 mm thicker and 3 mm wider.

 

[saschinkaiya]

Thanks for the measurements. It's not bad at all. I think gen is 48mm x 39 mm x 13,84mm. So it's basically 1 mm higher, 1 mm thicker and 3 mm wider.

Well since it is one of the very few "small" rm models (others would be for example 67, 17 or 005), I think the size of the case is actually the most important thing so 1mm higher and 3mm wider are are not so insignificant, since you would need for example only 1 mm more at the height and 2 mm at the width and you would be at the size of the rm 11-03 (depth aside), which is a huge watch.

What i want to say is, that its ofc not a bad watch, but for this model every mm counts, especially for me, since i think my wrist is too small for the usual size of a rm.

 

[Swiss_goupil]

Well since it is one of the very few "small" rm models (others would be for example 67, 17 or 005), I think the size of the case is actually the most important thing so 1mm higher and 3mm wider are are not so insignificant, since you would need for example only 1 mm more at the height and 2 mm at the width and you would be at the size of the rm 11-03 (depth aside), which is a huge watch.

What i want to say is, that its ofc not a bad watch, but for this model every mm counts, especially for me, since i think my wrist is too small for the usual size of a rm.

Those are the measurements of my RM001, not the RM010. However I believe this new RM010 uses the same case as it looks strangely similar, but until someone actually measure it we won’t be sure.

I would certainly agree with you and would like to see few of the small RMs repped properly in term of size


Sent from my iPad using Tapatalk

 

[Swiss_goupil]

Sure mate. My vernier is run out of battery and will change it and measure it tonight!!!

Cheers

Would be great if you could provide us with your measurements


Sent from my iPad using Tapatalk

 

[Seven7r]

Thanks for the measurements. It's not bad at all. I think gen is 48mm x 39 mm x 13,84mm. So it's basically 1 mm higher, 1 mm thicker and 3 mm wider.

I tend to disagree, I think watch size and proportions are one of the most important factors in a replica; even more so for an RM rep. The massive size of the RM001 rep was why I didn't want to buy it. The real RM001 is a relatively small watch, and my wrists are small. Hopefully the new RM010 doesn't use the same case as that.

 

[Zeula]

Would be great if you could provide us with your measurements


Sent from my iPad using Tapatalk

Soon bro, will do it.


Sent from my iPhone using Tapatalk

 

[jm_brc_7057]

I tend to disagree, I think watch size and proportions are one of the most important factors in a replica; even more so for an RM rep. The massive size of the RM001 rep was why I didn't want to buy it. The real RM001 is a relatively small watch, and my wrists are small. Hopefully the new RM010 doesn't use the same case as that.

True that. I also mixed up the sizes. Because he was talking 001 and I was thinking of the 010. So in conclusion we still haven’t got the measurements of the RM010.

 

[Zeula]

[mention]Swiss_goupil [/mention] Here you go mate. The dimension of new 010 case.

 

[Swiss_goupil]

Cheers [mention]Zeula [/mention]

Doesn’t seems to be the same case as the RM001


Sent from my iPhone using Tapatalk

 

[Zeula]

Cheers [mention]Zeula [/mention]

Doesn’t seems to be the same case as the RM001


Sent from my iPhone using Tapatalk

Yes mate. It's way too think. Lol


Sent from my iPhone using Tapatalk

 

[Zeula]

Sorry "thick"


Sent from my iPhone using Tapatalk

 

[jm_brc_7057]

Height and width is acceptable (gen is 48x39), this is 48x39. But it's way too thick, 16,9mm is a monster. Not only the fact that the gen is 13,84 but in my opinion everything above 15mm is massive.

 

[Kr guy]

Where can i purchase it mate?

 

[Razer126]

https://imgur.com/a/708PIe8
Some pictures. Kind of a shame that a factory like JF can’t make an RM10 so we get a very slim case. The deco plate doesn’t seem too hard to replicate and the RM10 doesn’t require a super special movement because it’s just a date wheel and no chronograph.


Sent from my iPhone using Tapatalk