• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

NEW NTTD No Time to Die Titanium/Titanium Seamaster 007 Edition

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,041
1,982
113
Just received my V3.5 NTTD today. If I’m being honest probably one of my most disappointing reps. The dial looks great and case shape and weight is true to Gen. However the bezel is very poor and cheap feeling, quite a bit of play both around the face but also horizontally weirdly. It is constantly about a mm off which is not great for my OCD. Is this a common problem? The mesh bracelet I also find is heavy and uncomfortable but I guess the latter judgement is subjective. The nato strap has been well documented here and I don’t have much more to add, just feels like a cheap strap from eBay. The lume is nice for the few seconds it lasts.

Sorry if I come across negative, maybe I got a dodgy watch. I know there are a lot of fans on this thread and I think most people might be able to overlook these issues. A new strap might revive it for me. Let’s see how it grows on me over the next few weeks but probably gonna end up on the sales section.

Anyways here are some pics of it on different straps.

Thats a common Problem on the gen. If you hit google with "omega seamaster bezel play" you will find a lot :D so its just....gen like... 1:1 rep ^^
Maybe you can do the dental floss trick to tighten it? but not sure if this works with the SMP Construction

As for the Mesh, well its not Titanium. So its heavy like every other Steel Mesh.
 
  • Like
Reactions: Jayalvin777

boodoo

You're Saying I Can Sell?
21/4/20
31
8
8
Thats a common Problem on the gen. If you hit google with "omega seamaster bezel play" you will find a lot :D so its just....gen like... 1:1 rep ^^
Maybe you can do the dental floss trick to tighten it? but not sure if this works with the SMP Construction

As for the Mesh, well its not Titanium. So its heavy like every other Steel Mesh.

Damn VSF with some top tier work even copying gen flaws lol. Will try the floss mod after a visit to the shops tmo, will check in thereafter!

Yh I get that the mesh is heavy with the steel but I found the disparity in weight of the titanium watch case and titanium bracelet not in equilibrium. Making a titanium bracelet to this would deffo complete the package.
 

elconquistador

Put Some Respect On My Name
Certified
10/6/10
3,109
440
83
This is why ultimately the price tag for this watch is a joke. It's a nice watch but it's not north of £7,000 nice. For all the hype surrounding the implementation of Titanium and it's overall craftsmanship, this sort of breakage at this price point is unacceptable. This is what happens when you allow an actor to design a watch because the wrist he wanted to slash a few years ago can't cope with wearing stainless steel for too long.
Despite going upmarket in price Omega is making more and more of their parts in China.

Sent from my Pixel 3 XL using Tapatalk
 

imranbecks

I'm Pretty Popular
17/11/15
2,144
3,152
113
The Neutral Zone
It's definitely why Omega had to redesign it. Because of breakage like this....

50592062432_99b3b25c07_b.jpg
 

5ive7even

You're Saying I Can Sell?
16/7/20
33
4
8
Thats a common Problem on the gen. If you hit google with "omega seamaster bezel play" you will find a lot :D so its just....gen like... 1:1 rep ^^
Maybe you can do the dental floss trick to tighten it? but not sure if this works with the SMP Construction

As for the Mesh, well its not Titanium. So its heavy like every other Steel Mesh.

My V3 had the same loose and sloppy bezel play. I removed the bezel and gently raised the metal tabs/detents under the bezel with a small flathead jewelers screwdriver and it made a huge difference. It is now much tighter and feels more solid overall. Hope that helps.
 
  • Like
Reactions: keisuke_z

mystic_cowboy

You're Saying I Can Sell?
6/6/20
36
10
8
This is why ultimately the price tag for this watch is a joke. It's a nice watch but it's not north of £7,000 nice. For all the hype surrounding the implementation of Titanium and it's overall craftsmanship, this sort of breakage at this price point is unacceptable. This is what happens when you allow an actor to design a watch because the wrist he wanted to slash a few years ago can't cope with wearing stainless steel for too long.

That is pretty damn embarrassing for Omega tbh. Be one thing if it was a $3k watch, but people are buying this instead buying a Rolex, should be ashamed.

Having said that, I like the design of the watch, and I just ordered a rep from Trusty lol. Even if I don't like the rep mesh, the photos I;ve seen of it on a leather strap have been fuego.
 

MasterWatch

Master of None
Patron
Certified
26/8/12
2,484
510
113
Well good thing is that the gen got a redesign before the rep Ti bracelet so maybe factories can update their design as well.
 

Arachnoidosis

You're Saying I Can Sell?
18/3/20
93
120
0
This is why ultimately the price tag for this watch is a joke. It's a nice watch but it's not north of £7,000 nice. For all the hype surrounding the implementation of Titanium and it's overall craftsmanship, this sort of breakage at this price point is unacceptable. This is what happens when you allow an actor to design a watch because the wrist he wanted to slash a few years ago can't cope with wearing stainless steel for too long.

Lol. I mean he ostensibly just had input into the aesthetics of the watch. He's not involved with the engineering of it.
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,041
1,982
113
My V3 had the same loose and sloppy bezel play. I removed the bezel and gently raised the metal tabs/detents under the bezel with a small flathead jewelers screwdriver and it made a huge difference. It is now much tighter and feels more solid overall. Hope that helps.

How did you remove it? like a Rolex Bezel, just pop off with a knife?
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,041
1,982
113
It's definitely why Omega had to redesign it. Because of breakage like this....

50592062432_99b3b25c07_b.jpg

Did they use cheap superglue to connect the mesh to the endpiece? lol Thats a straight kick for Omega :jeff:

All those Rolex Guys at Rolex SA will be laughing in theyre Chairs.

Maybe Omega should cooperate with VSF, i'm sure with a little Money they could make it better (know better Factorys) :p

​​​​​​
 

imranbecks

I'm Pretty Popular
17/11/15
2,144
3,152
113
The Neutral Zone
If the mesh that is connected with the endlinks can easily break off like that on the gen due to god knows what, I'd gladly stick with my V3 mesh that has the reinforced endlinks. The last thing I want is for that part to suddenly break off while its on the wrist.
50592886412_2ed791d473_b.jpg
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,041
1,982
113
If the mesh that is connected with the endlinks can easily break off like that on the gen due to god knows what, I'd gladly stick with my V3 mesh that has the reinforced endlinks. The last thing I want is for that part to suddenly break off while its on the wrist.
50592886412_2ed791d473_b.jpg

Yeah that's true. It happened 1 time to me as the bracelet on my JF Sub fell appart. But it was during picking it so no drop.

I think on the Rep it won't break that easy as it is SS and welding is strong.
The Problem is the Titanium Material. Welding Ti is more problematic than Steel as it has a higher welding point and isn't that flexible/ductile like SS. So it ca break easier than the Steel Bracelet.
 

freefallrlc

Active Member
21/6/15
452
123
43
Yeah that's true. It happened 1 time to me as the bracelet on my JF Sub fell appart. But it was during picking it so no drop.

I think on the Rep it won't break that easy as it is SS and welding is strong.
The Problem is the Titanium Material. Welding Ti is more problematic than Steel as it has a higher welding point and isn't that flexible/ductile like SS. So it ca break easier than the Steel Bracelet.

Let´s hope. In that case the Rep would be better than the Gen lol
 

john.harris

Known Member
DO NOT TRADE WITH ME
8/11/20
103
22
0
That is pretty damn embarrassing for Omega tbh. Be one thing if it was a $3k watch, but people are buying this instead buying a Rolex, should be ashamed.

Having said that, I like the design of the watch, and I just ordered a rep from Trusty lol. Even if I don't like the rep mesh, the photos I;ve seen of it on a leather strap have been fuego.

this is true. 7000 quid is right rolex money.
 

imranbecks

I'm Pretty Popular
17/11/15
2,144
3,152
113
The Neutral Zone
I think on the Rep it won't break that easy as it is SS and welding is strong.
The Problem is the Titanium Material. Welding Ti is more problematic than Steel as it has a higher welding point and isn't that flexible/ductile like SS. So it ca break easier than the Steel Bracelet.

With that said, suddenly I don't really want a replica titanium mesh. If the gen can brake off like that, how strong would a replica titanium mesh be I wonder before it brakes at the link like the gen. I think I'll stick with my V3 steel mesh.

​​​​​​
 

padorkous

Known Member
13/1/17
152
59
28
Titanium doesn't just "break" like that, it's the welds that most likely have failed and this has to do with the procedure of welding titanium, its all about quality control and not the actual material itself, so calm down people.
Also, I think that the reason they haven't release a ti mesh so far is that basically, they use the ss mesh as a "clay" model and constantly refining details about it because doing so with ti would be more costly both in terms of money and time.
 

Lazza

Known Member
13/11/17
130
65
28
So this is the new updated one, called 2020, Most people including me, i have 2 Genuine, now my favourite watch of all is the Casino Royale on the black leather, and it's my fav Bond film, I get a kick out of seeing it on his wrist, knowing mine is that watch. If i now brought the NTTD watch and watched the film and saw the differences I would not be impressed. Its nearly 8k, If I was not on here I would not have known it's changed. https://www.mappinandwebb.com/Omega-...a1sstdtv2osu4i
 
Last edited:

freefallrlc

Active Member
21/6/15
452
123
43
Omega just make it a SS bracelet, weld it well that it won´t break.
If the gen has a SS bracelet, Gen AND Rep owners will be satisfied :p