R2D4's 2531.80.00 Seamaster Parts List Reference Guide

[R2D4]

I developed this list out of frustration and contradictions in part#'s between the Red Book and Otto Frei. Almost all of these numbers are confirmed but each modder should note to ask your AD for clarification of the exact part you are to order before you pull the trigger. In other words, I am 98% sure that these numbers are accurate but use at your own risk.

Now, If you have ever seen the Red Book you will appreciate Otto's attitude as I have. There are terms in the book that must be interpreted from abbreviations in foriegn lingo and even then the abbreviations are incomplete or not listed.

THIS IS THE BEST PART! (There is a Carrure# or Middle Case part number not listed on Frei's site. I believe this will not include the bezel, tubes, casebacks, crystal, crowns and the fittments as shown on the 007 under their watch cases $689.00 special showing the case assembly not the middle case! I have not confirmed this but it is promising as the price for the gen case should be much less than 689.00! Again an assumption of mine and unconfirmed. If you see something wrong PM me and I'll update it!

Enjoy!

 

[R2D4]

Update #1 Complete

Update #1 (Added bezel to include retainer)

 

[spooky driver]

this is so cool... well done R2D4

 

[R2D4]

Thank you so much Spooky! This is what I love to do, help others.

 

[Omega-Man]

Nice work. Thank you.

 

[bender222]

156 dollah.rs for just a bezel and 212 for the ar coated crystal ouch

 

[evo5555]

good effort..

 

[johnstonmurray]

Thanks, good work

 

[Hambone]

Thanks, good work

Bot did he say?

 

[olworthers]

This is excellent - really helpful!

Does anyone know what parts do/don't fit the latest seamaster pro model (seamaster letters in red and "Qmega" logo)?

I'd like to fit a new crown and tube, and possibly change the dial.


Cheers,

OW

 

[R2D4]

The dial should fit but the dial feet are shorter for the 2892 so you might have to rely on one of the locking claws to latch and dial dot the other side or leave it. Once it's in the case and the dial feet are in there, it isn't moving anyway.

The crown might fit with some modification. The red coaxial gen tube might be threaded where as the older 2531.80 and 2254 models are press fit tubes. So order the crown and tube on the guide above just in case. Good luck.

 

[Mr. Pap]

I hope i am not breaking any rules here, but i will update the franken planet ocean thread with some smp stuff and i thought to add the serials from cousins...

So here you go,

Also since there isnt one thread for the Seamaster Chrono Diver i throw these serials too here

Case Number 178.0514 (The old Seamaster Chrono model 2599.80.00)

Case Number 178.0522 (The new Seamaster Chrono model 2225.80.00)

 

[R2D4]

Thanks Pap great addition.

 

[marressey]

Forgive a slightly noobish question maybe, but here goes:
Will these gen SMP parts fit with the new ceramic SMP (2012 version) that is out there now?

 

[txrob779]

I am gonna PM asswhip these guys to see if this shit is still relevant

I used to have the gen 2253.80. I get lost in all the XXXX.80 models, LOST.

 

[Monty010]

is the link to the list down?

 

[DavidModic]

Ummm... I cannot find the reference list. Has it disappeared while the forum moved (a few times)? @R2D4 .

Ta, mate.

 

[Mattjames84]

The pic doesn't seem to be mobile friendly, can someone tell me the part numbers for the dial, hands and bezel insert? It's all bury for me

 

[Dsr89d]

Just ordered a gen 2531.80, but it’s a bit banged up. I was having trouble finding a replacement bezel, but this makes things a lot easier. Thank you!