• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Help with stripped VSF V2 Seamaster crown

elconquistador

Put Some Respect On My Name
Certified
10/6/10
3,109
440
83
Not sure if it is the crown or the tube thread that is stripped on my VSF V2
Does anyone know the correct gen part number for these?
Would the current case tube screw out as I believe the gen does?
d2c761fbc5ebc74e98df0c1ecad2bde1.jpg
 

elconquistador

Put Some Respect On My Name
Certified
10/6/10
3,109
440
83
Going to try to get an ORF crown and tube to see if that fits.
 

R2L

Put Some Respect On My Name
Supporter
Certified
17/4/14
3,552
1,139
113
I believe on these you need a 6.3mm crown as the 5.3 will be too small.


Sent from my iPhone using Tapatalk
 

elconquistador

Put Some Respect On My Name
Certified
10/6/10
3,109
440
83
I believe on these you need a 6.3mm crown as the 5.3 will be too small.


Sent from my iPhone using Tapatalk
I'm stupid, i figured that out after I posted the ebay crown.

Can't find a 6.3mm one though
 

R2L

Put Some Respect On My Name
Supporter
Certified
17/4/14
3,552
1,139
113
If you can get a comparable one from ORF then it should work, however you will need the tube as well as the threads may not be the same.
Another option is you get one that is 6mm (with tube) as the 0.3mm will not be noticeable once in place.


Sent from my iPhone using Tapatalk