• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Fixing the Wonky bezel on an ARF SD43 V3

DD60

Eagle Eyed Moderator
Staff member
Moderator Sales
Certified
28/4/17
17,019
8,896
113
Just picked up this ARF SD43 V3 and whilst admiring it's solid gen like rep beauty I realized it features a wonky ass loose, wobbly bezel. The bezel looks fine at first glance. It rotates and clicks better than 95% of the plethora of rep bezels I've had previously. Unfortunately I noticed a slight springy type action when pressing down on it. Looking a bit closer it became obvious the bezel was not sitting flush on the case. I tried repressing and alas found no joy. So, I said to myself, Self, Let's take it apart and fix this "Spongy bezel" right here and now. The following is a pictorial recap of my adventure.
If you should experience this rather common Spongy bezel problem with your ARF SD43 V3, I hope you can use this pictorial as a resource to fix it.

Oh yes, there is a bit of an unexpected bonus as well. Have you found rust hidden in your bezel assembly. Well, I did.


























 

macarone

Put Some Respect On My Name
Patron
Certified
7/3/17
5,099
2,983
113
CONUS USA
Great job! Can I send you a spongy noob?


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: DD60

vortex4me

You're Saying I Can Sell?
19/7/20
38
5
0
Very informative...thank you!


Sent from my iPhone using Tapatalk
 
Last edited by a moderator:
  • Like
Reactions: DD60

KJ2020

Time Traveler
Supporter
12/3/18
32,398
56,783
113
Very informative...thank you!


Sent from my iPhone using Tapatalk

No need to quote the whole post, we've already scrolled through it once. Just imagine how tedious it would be if everyone did that. You can edit your post to delete the OP's pics.
 
  • Like
Reactions: Slugger and DD60

KJ2020

Time Traveler
Supporter
12/3/18
32,398
56,783
113
ZZc35Q.jpg

This is awesome bro. Identifying the crystal retaining ring as being too tall and reducing it a correct amount is a perfect solution that looks beyond accepting that a factory as good as ARF must have done it right. Your work is superlative, Bravo!
 

mclarendude

𝙟𝙚𝙩𝙨𝙥𝙚𝙚𝙙
Staff member
Moderator Sales
Certified
16/2/11
26,418
28,773
113
Palm Beach
Is that my former SD43? What an amazing job. I never realized that!
 
  • Like
Reactions: DD60

vortex4me

You're Saying I Can Sell?
19/7/20
38
5
0
No need to quote the whole post, we've already scrolled through it once. Just imagine how tedious it would be if everyone did that. You can edit your post to delete the OP's pics.

Don’t know if I did it right, but I tried. I’m still learning how to use this app.


Sent from my iPhone using Tapatalk
 

KJ2020

Time Traveler
Supporter
12/3/18
32,398
56,783
113
Don’t know if I did it right, but I tried. I’m still learning how to use this app.


Sent from my iPhone using Tapatalk

You did not delete the pics. Tap on the + sign at the bottom right corner of your own post where you quoted all the pics and tap on edit. Then edit the quoted part to remove all the text but a few relevant phrases. Delete all of the text with image info in it like http, url, img, jpg, etc. Thanks!
 
Last edited:

DD60

Eagle Eyed Moderator
Staff member
Moderator Sales
Certified
28/4/17
17,019
8,896
113
Is that my former SD43? What an amazing job. I never realized that!

This is it. It took me about a week b4 I noticed it. Perfect now except I found a very fine hard to notice crack in the insert. Took it out to glue it, then it cracked again at the pearl while I was pressing it. First time I've ever cracked an insert, so my luck finally ran out.
Sad thing is now I can't wear it after all this work until I find a new insert. I guess it's back to wearing my 5 digit subs.
 

DD60

Eagle Eyed Moderator
Staff member
Moderator Sales
Certified
28/4/17
17,019
8,896
113
This is awesome bro. Identifying the crystal retaining ring as being too tall and reducing it a correct amount is a perfect solution that looks beyond accepting that a factory as good as ARF must have done it right. Your work is superlative, Bravo!

Thanks for the compliment, means alot coming from someone as talented as you.

Yes, I'm convinced these Sd43 v3's are coming from AR factory with this flawed crystal retaing ring. It's not a difficult fix now that the cause of the problem has been identified.

Even so, AR factory needs to correct this as it is obvious flaw that they must notice when they are assembling these v3's.
Something to keep in mind when QC' ing the Sd43 v3.
 
  • Like
Reactions: KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
32,398
56,783
113
Can you provide accurate measurements of the inside and outside diameters of the insert? More of us can help look for one if we know the measurements. I wonder if it's the same size as the one in the 116660 DSSD.

macarone do you know bro?
 

DD60

Eagle Eyed Moderator
Staff member
Moderator Sales
Certified
28/4/17
17,019
8,896
113
Can you provide accurate measurements of the inside and outside diameters of the insert? More of us can help look for one if we know the measurements. I wonder if it's the same size as the one in the 116660 DSSD.

macarone do you know bro?





Thanks for looking, I appreciate your help
 
  • Like
Reactions: KJ2020 and XpanzerX

macarone

Put Some Respect On My Name
Patron
Certified
7/3/17
5,099
2,983
113
CONUS USA
Can you provide accurate measurements of the inside and outside diameters of the insert? More of us can help look for one if we know the measurements. I wonder if it's the same size as the one in the 116660 DSSD.

macarone do you know bro?

I’d have to throw a set of calipers on one of the dssd’s to confirm,
dacfb6b43b16ab5a6a2a5def67f57389.jpg

however as I recall ordering from spongebob he actually had 1 for each in stock.
785c0406dcbff16f096075d8a2346304.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: DD60

vortex4me

You're Saying I Can Sell?
19/7/20
38
5
0
You did not delete the pics. Tap on the + sign at the bottom right corner of your own post where you quoted all the pics and tap on edit. Then edit the quoted part to remove all the text but a few relevant phrases. Delete all of the text with image info in it like http, url, img, jpg, etc. Thanks!

I’m using an app called Tapatalk and I don’t see any + sign anywhere. When I go back to the post in my app, it shows to be fixed and I don’t see anything you’re talking about.


Sent from my iPhone using Tapatalk
 

KJ2020

Time Traveler
Supporter
12/3/18
32,398
56,783
113
So basically 31.8mm ID and 40mm OD.

Ive looked at a few and don't see anything for the SD43. It's possible a PARNIS 40mm insert will fit, those aren't stellar but I've used one or two after digging out the white paint and doing a paint mod. I really think your best bet is going to be a TD bro or M2M - maybe ask member LuoIsBoss I know he built a Franken
 
  • Like
Reactions: DD60

KJ2020

Time Traveler
Supporter
12/3/18
32,398
56,783
113
I’d have to throw a set of calipers on one of the dssd’s to confirm,
dacfb6b43b16ab5a6a2a5def67f57389.jpg

however as I recall ordering from spongebob he actually had 1 for each in stock.
785c0406dcbff16f096075d8a2346304.jpg



Sent from my iPhone using Tapatalk

Is that a 116660 or a 126600?