Watch services - www.watchmakerusa.com

[Oascom]

 

[Oascom]

Dead explorer for some love

 

[Lutaito]

Dead explorer for some love

You have some great skill in finishing the looks of the watch. Hopefully i can get somewhere close . Btw the bench grinder/buffer you said from harbor freight. Are any of these good?
https://www.harborfreight.com/bench-grinder-with-flex-shaft-43533.html

https://www.harborfreight.com/6-in-buffer-61557.html

thanks

 

[Oascom]

Dead Submariner for new movement installation

 

[Oascom]

You have some great skill in finishing the looks of the watch. Hopefully i can get somewhere close . Btw the bench grinder/buffer you said from harbor freight. Are any of these good?
https://www.harborfreight.com/bench-grinder-with-flex-shaft-43533.html

https://www.harborfreight.com/6-in-buffer-61557.html

thanks

I bet you could use those, I use something a bit more expensive but if you use right wheels I think you can have the same results.

Good luck

 

[Lutaito]

I bet you could use those, I use something a bit more expensive but if you use right wheels I think you can have the same results.

Good luck

would you mind sharing what kind of grinder you use from harbor? I can ask my cousin to buy for me in US as they dont send to Canada.

thanks

 

[Oascom]

would you mind sharing what kind of grinder you use from harbor? I can ask my cousin to buy for me in US as they dont send to Canada.

thanks

I don't use any from harbor freight.

I use this setup
https://www.esslinger.com/foredom-bl...-115v-or-230v/
Plus the hood

https://www.esslinger.com/foredom-po...or-air-filter/

And Dremel/ assortment of pads, sandpapers , blocks, etc. Too many to list.


But I'm thinking about upgrading my setup as this one is very small and takes only 4" wheels.

 

[Lutaito]

I don't use any from harbor freight.

I use this setup
https://www.esslinger.com/foredom-bl...-115v-or-230v/
Plus the hood

https://www.esslinger.com/foredom-po...or-air-filter/

And Dremel/ assortment of pads, sandpapers , blocks, etc. Too many to list.


But I'm thinking about upgrading my setup as this one is very small and takes only 4" wheels.

Ohh i thought you have one from harbor too cz on one of the post you mentioned i think to get one from harbor unless im mistaken.
but thanks a lot buddy for sharing. I was thinking for the 6in grinder on harbor. Was there for cheap and im just starting. Ordered sanding stick set from esslinger and thinking of a garyflex block 120 or 240 grit and one of the grinders.

 

[Oascom]

Another dead watch today, supposedly serviced....

Few striped gears and look at that dirt....

 

[kennygconspiracy]

Another dead watch today, supposedly serviced....

Few striped gears and look at that dirt....

Pat you're the hero we need, not the hero we deserve

Sent from my ONEPLUS A6003 using Tapatalk

 

[joonwantswatches]

Project "girlfriend" completed

Gen case , gen bracelet, gen DW used as dwo, gen crown, gen dial, rep hands , ETA movementem.

Black tapestry dial, my goodness its beautiful.

 

[Oascom]

Black tapestry dial, my goodness its beautiful.

Yup, she likes it

 

[Oascom]

 

[Oascom]

Omega serviced and dw aligned waiting for new crown .

 

[Oascom]

Rollie for some love

 

[Oascom]

Panerai for dial chip "fix" and dw alignment

 

[SUBKILLER]

Rollie for some love

My Second watch serviced by this man. The workmanship in a timely matter is second to none! Thank you again oascom.

Sent from my SM-G965U using Tapatalk

 

[Oascom]

My Second watch serviced by this man. The workmanship in a timely matter is second to none! Thank you again oascom.

Sent from my SM-G965U using Tapatalk

Thanks mate appreciate it

 

[Oascom]

Little work today, movement service and new inserts, cleaning

 

[kennygconspiracy]

Little work today, movement service and new inserts, cleaning

As always, these pictures are fantastic. Thank you for sharing how your work is done, or the process. Not many watchmakers do this. It's extremely informative and fascinating for us mon-watchmakers. It is truly appreciated!

Also, that's a great new logo you have for your profile. Business logo?

Sent from my ONEPLUS A6003 using Tapatalk