- 16/12/12
- 53
- 7
- 0
Why?
Sent from my iPhone using RWI
Yeah me to. But you can try and mod the pearl. If you place a drop of clear coat on top of the pearl, it looks just like gen.
However, I my case I couldn’t get a big fat droplet to dry nicely. They all collapse.
Uv glue doesn’t harden enough, 2 compounds glue will do the trick probably.
this stuff works great on pearls , ive been using it for a years now
https://2wardspolymerclay.com.au/shop/gel-du-soleil/
Thx guys! Question though: do you remove the pearl before applying the glaze? If not, what are you using to make sure the glaze doesn’t hit the bezel - masking tape?
Sent from my iPhone using Tapatalk
if you use the stuff i showed you, its very thick and doesnt run , if you get it on the bezel you can easily wipe it off , as it wont cure till you blast it with UV light
Awesome. Thank you!!!
On a side note, would you happen to know where I can find a gen bezel?
Sent from my iPhone using Tapatalk
this stuff works great on pearls , ive been using it for a years now
https://2wardspolymerclay.com.au/shop/gel-du-soleil/
Thx guys! Question though: do you remove the pearl before applying the glaze? If not, what are you using to make sure the glaze doesn’t hit the bezel - masking tape?
Sent from my iPhone using Tapatalk
Raddave Okay, that looks good. But is quite flat right? Would a done shape be possible? Or will it collapse?
(Uv glue worked well for the shape. But the top coat stays soft. Rub it once and it’s matte instead of clear.)
if you use the stuff i showed you, its very thick and doesnt run , if you get it on the bezel you can easily wipe it off , as it wont cure till you blast it with UV light
How far down do you need to sand the pearl? And, what’s the best material to use for sanding?
Sent from my iPhone using Tapatalk
what does your pearl look like now ?
me personally , i empty the lume bucket and relume it first , so ive never actually had to sand it