116610 waterproofing

[Usernametaken]

I’ve been digging everywhere, I’ve built a no date using an ARF sh3135 116610 with gen dial hands and bezel. I really want this as waterproof as possible but can’t seem to find the back gasket anywhere? I think the crown tube is the 7030 but it major to get it my case. I just want to replace all the o rings and see how good I can get. Anybody know this info?


Sent from the RWI App

 

[Rx4Time]

Do you have the rep one that came with it? Unless you tested it and it failed a pressure test, I'd suggest you first test it with the stock gasket. I've never had one fail a pressure test from the caseback gasket. If you need to replace, here's the best source.

https://www.esslinger.com/generic-rolex-case-back-gaskets/

https://www.esslinger.com/generic-rolex-crown-gaskets/

https://www.esslinger.com/generic-rolex-watch-crystal-gaskets/

 

[Usernametaken]

Thanks very much I appreciate the help but what I’m trying to figure out is what the part number for the case back gasket is. I have pressure tested and it leaks from the gasket and crown at 4 atm according to my cheap tester.


Sent from my iPhone using RWI

 

[Usernametaken]

I even filled out one of esslingers forms for the gaskets and they still said they couldn’t help


Sent from my iPhone using RWI

 

[fu-ranch]

Dealing with the same problem, even with different searches. Anyone know the part number for the case back o-ring on the 116610? Thanks

 

[beau7816]

Do you have the rep one that came with it? Unless you tested it and it failed a pressure test, I'd suggest you first test it with the stock gasket. I've never had one fail a pressure test from the caseback gasket. If you need to replace, here's the best source.

https://www.esslinger.com/generic-rolex-case-back-gaskets/

https://www.esslinger.com/generic-rolex-crown-gaskets/

https://www.esslinger.com/generic-rolex-watch-crystal-gaskets/

Anyone know of a UK suppler for the above?