• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

AVENGER BANDIT TITANIUM GF VS Gen

Thatwatchguy

Supporter
Supporter
Certified
9/7/17
6,705
3,958
113
And make sure your cuts are straight otherwise it will be a pain trying to fit the spring bars!
 

tkingjr

Watches & woodworking
Gold Patron
Certified
7/4/16
2,848
1,607
113
Northeast USA and Shenzhen, China

berry25

Active Member
Certified
26/2/17
200
25
28
Thanks for all the advice guys. Got It sorted. Couple of questions as this is my first chrono rep with a 7750 movement.
1) Is the date wheel not meanr to change bang on at 12pm like the other gf reps. This starts to go forward at 11pm with it changing over to 12.

2)A when changing the date it seems like there's a bit of play on the stem as when in the position to change it you could turn it and the date not moving. You feel it spin but nothing happens. Had to push the stem back in back out untill it eventually starts changing

Sent from my SM-G950F using Tapatalk
 

TBK

I'm Pretty Popular
11/3/09
1,332
540
113
EU
berry25

1) yes. Mine does that to. Needs about 45 minutes to change the date.
Some my other 7750’s seem to change date better.

2) this doesn’t sound familiar to me.

if any of the above bothers you too much you can always contact your TD or get your movement serviced locally.
 

berry25

Active Member
Certified
26/2/17
200
25
28
No 1 i weren't too sure and with issue no 2 might have been me doing it wrong as working fine today

Sent from my SM-G950F using Tapatalk
 

berry25

Active Member
Certified
26/2/17
200
25
28
hmm after all the advice above I went to adjust and cut one more off as the clasp wasn't centered so went to cut one off and I ended up cutting into the hole. had to cut it again and now its too tight :( Hopefully my dealer can sort a replacement one at a good price
 

TBK

I'm Pretty Popular
11/3/09
1,332
540
113
EU
O man that sucks. That’s why I warned you about it.
Yeah, you could get a replacement. Perhaps you can sell yours here on RWI to someone with tiny wrists;-)
 

tkingjr

Watches & woodworking
Gold Patron
Certified
7/4/16
2,848
1,607
113
Northeast USA and Shenzhen, China
tbh my fault entirely. shouldn't be resizing a strap at 3am lol

When you try again be sure the clasp adjuster is in the middle. That will give you a little room for error. Cut just outside the line on the strap. It is a little more difficult to assemble but it is better than being short.
 

__ceco__

You're Saying I Can Sell?
12/1/15
59
19
0
EU
I read this topic but cant understand what are the diferences between v.1 and v.2, can someone explain me? Thnx
 

Eagl3

Renowned Member
2/12/16
593
102
43
Biggest difference was the "Gertifie" vs "Certifie" on the caseback of the v1 vs V2
 

__ceco__

You're Saying I Can Sell?
12/1/15
59
19
0
EU
Biggest difference was the "Gertifie" vs "Certifie" on the caseback of the v1 vs V2

Gertifie vs Certifie is the diference between Avenger Blackbird v1 vs v2 or its the same with Avenger Bandit v1 vs v2
 

Bart Bever

Active Member
8/2/13
394
52
28
Belgium
It's inhere somewhere..
The biggest tell was the datewheel printing.
No longer available since GF was raided.. This is one quality rep that will never leave the collection.

Greetz!
 

Eagl3

Renowned Member
2/12/16
593
102
43
Gertifie vs Certifie is the diference between Avenger Blackbird v1 vs v2 or its the same with Avenger Bandit v1 vs v2

My bad, thought this was the blackbird thread. Misread the title. For the bandit it was mostly just the date wheel font. I believe everything else was considered good enough.
 

__ceco__

You're Saying I Can Sell?
12/1/15
59
19
0
EU

Exscuse me for the bad photoes, but can you tell me, what version is my watch?
 

__ceco__

You're Saying I Can Sell?
12/1/15
59
19
0
EU

Some new pictures with the datewheel visible. I bought November 2017 and i think that the v.2 was reliesed month later in December. How do you think, is this watch v2 ?
 
  • Like
Reactions: vcappp