No Info atm. Why they should Release a V4? In my opinion they did a very good Job with the V3.
Gesendet von iPhone mit RWI
As a minimum the caseback requires thinning (locolouie style). At present the watch is 10% thicker than gen. that is a big deal. It’s a simple enough mod, so v4 should have this done from factory
Sent from my iPhone using Tapatalk
It’s a simple enough mod...
Sent from my iPhone using Tapatalk
In fact, very time consuming for casebacks that have been factory machined too thick.
Yes, then, you are correct. They should also thin the bezel as well, since they will never get to 9.8mm just thinning the caseback without hitting the rotor. They need to thin the bezel as well, and maybe lower the handstack. But then the watch will be more difficult for their factory workers to assemble. And who knows where that will lead...
They should also thin the bezel as well, since they will never get to 9.8mm just thinning the caseback.
Just thinning the caseback gets you to 10.1mm before you hit the rotor. The last .3mm comes from the bezel. Then the handstack needs to be compressed through staking since the Miyota 9015 does not have alternative H options.